408-9452 Datasheet, PDF (1/2 Pages) Tyco Electronics – This instruction sheet covers Extraction Tools

Extraction Tools
843475-1 and -2
Instruction Sheet
408-9452
(was IS 9452)
07 AUG 08 Rev A
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-use, production operations is available.
Socket Contact
Front of
Housing
Locking Lance
Lance
Recess
Solid
Rib
Side of
Housing
Extraction
Tip (Short)
Housing
87895-1
and -2 and
87896-[ ]
Tool 843475-1
Locking Lance Release Slot
Figure 1
Housing
86127-1
and -4
Locking Lance
Release Slots
Figure 2
Extraction
Tip (Long)
Tool 843475-2
1. INTRODUCTION
This instruction sheet covers Extraction Tools
843475–1 and –2 which are designed to release the
locking lances of sockets from AMPMODU*
Connector Mod IV housings. Read this material
thoroughly before extracting any contacts.
NOTE
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures and
illustrations are for reference only and are not
drawn to scale.
Reason for revision is given in Section 5, REVISION
SUMMARY.
2. DESCRIPTION
Each tool features a flat extraction tip at the opposite
end of the handle. Tool 843475–1, the tool with the
shorter extraction tip, is used in housings that have
the release slots in the front of the housing. See
Figure 1. Tool 843475–2, the tool with the longer tip,
is used in housings that have the locking lance
release slot in the side. See Figure 2.
3. EXTRACTION PROCEDURE
If you have a front release housing, use Tool
843475–1; if you have a side release housing, use
Tool 843475–2. Proceed as follows:
E2008 Tyco Electronics Corporation, Harrisburg, PA
TOOLING ASSISTANCE CENTER 1-800-722-1111
All International Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 2
LOC B