English
Language : 

408-7803 Datasheet, PDF (1/2 Pages) Tyco Electronics – Reasons for reissue of this instruction sheet are provided in Section 6, REVISION SUMMARY
Clinching Tool 91117-1
Instruction Sheet
408-7803
07 JAN 09 Rev E
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-use, production operations is available.
0.51+0.05/-0.02mm
[.020+.002/-.001 in.]
(Jaws Bottomed)
Upper Jaw
Setscrew
Threaded Punch
Handles
Lower Jaw
Figure 1
1. INTRODUCTION
Clinching Tool 91117–1 is designed to install external
keys and key rivets onto a 2–row box connector to
provide polarization of mating connectors.
NOTE
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures are
not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 6, REVISION SUMMARY.
2. DESCRIPTION (Figure 1)
The clinching tool consists of a handle, upper jaw and
lower jaw. The upper jaw contains a setscrew and a
replaceable threaded punch which clinches the rivet
through the connector and key. The lower tool jaw
supports the rivet when the tool handles are closed.
3. CLINCHING PROCEDURE
Before starting, make certain the connector, external
key, and key rivet are compatible (see Figure 2).
NOTE
i
Close the tool handles and measure the distance
between the punch tip and lower jaw. If
necessary, adjust the threaded punch and
setscrew to obtain the clearance shown in
Figure 1. To adjust the punch, loosen the
setscrew, adjust threaded punch up or down as
required, and tighten setscrew.
Refer to Figure 2 and proceed as follows:
1. Determine keying position required on the
connector. Key cavities are letter–coded on one
Lower
Jaw
CONNECTOR
530942-[ ], 531127-[ ],
531720-[ ], 531722-[ ],
531124-[ ], 531719-[ ],
531721-[ ]
EXTERNAL
KEY
KEY
RIVET
530341-1
530347-3
Key Rivet
Number
Code
Connector
External
Key
Figure 2
Key
Cavity
Punch
Tip
Upper
Jaw
E2009 Tyco Electronics Corporation, Harrisburg, PA
TOOLING ASSISTANCE CENTER 1-800-722-1111
All International Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 2
LOC B