408-4559 Datasheet, PDF (1/1 Pages) –

Heavy-Duty Cable Cutter
Hand Tool 605744-1
Instruction Sheet
408-4559
22 JUL 08 Rev A
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-use, production operations is available.
1. INTRODUCTION
NOTE
i
Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
Figure is not drawn to scale.
NOT FOR STEEL
350 MCM
Heavy–Duty Cable Cutter Hand Tool 605744–1
(Model CCS–16) is designed to cut aluminum or
copper electrical cable up to size 350 MCM [177 mm²]
with conductor diameter of 17.3 mm [.68 in.].
CAUTION
!
Steel or aluminum conductor steel reinforced
(ACSR) cable will permanently damage the
cutting blades.
406 mm
[16 in.]
2. DESCRIPTION
Both blades are made of a high grade steel alloy, and
the handle assembly is made of lightweight tubular
steel and has vinyl hand grips.
3. OPERATION
Inspect the tool to ensure it conforms to the
dimension shown in Figure 1.
1. Select the cable, and mark the location that the
cable is to be cut.
DANGER
Make sure power to cable is DISCONNECTED.
Keep hands away from the cutting blades.
Figure 1
2. Place the cutting blades over the location mark,
and close the tool handles.
4. MAINTENANCE
1. After use, clean and lightly oil the cutting blades
prior to storage.
2. Nicks and minor damage to the cutting blades
can be repaired by filing and stoning along the
beveled and flat surfaces of the blades.
3. In the event of major damage, the tool should be
replaced. There are no replaceable parts.
5. REVISION SUMMARY
S Revisions to this instruction sheet include:
Updated document to corporate requirements
E2008 Tyco Electronics Corporation, Harrisburg, PA
TOOLING ASSISTANCE CENTER 1-800-722-1111
All International Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 1
LOC B