English
Language : 

408-4099 Datasheet, PDF (1/5 Pages) Tyco Electronics – Pneumatic TETRA-CRIMP Adapter
Pneumatic TETRA- CRIMP* Adapter
679305- 1 (Used with 626 Pneumatic
Tooling Assemblies)
Quick
Pin(s)
Instruction Sheet
408- 4099
11 MAR 10 Rev E
Tool Holder
Assembly
189767- 1
TETRA- CRIMP
Adapter
679305- 1
Crimping
Jaws
Product: PIDG* Terminals and Splices
PLASTI- GRIP* Terminals
PIDG FASTON* Terminals
PLASTI- BOND* Terminals
Wire Size: 22- 10 AWG, Stranded
Product Catalog: 82042
Tooling Catalog: 124208
Spring- Loaded
Stop
Figure 1
1. INTRODUCTION
Pneumatic TETRA--CRIMP Adapter 679305--1,
shown in Figure 1, is designed to crimp the terminals
and splices listed in Figure 2. The adapter is used
with 626 Pneumatic Tooling Assemblies 189721--1
and 189722--1 when fitted with Tool Holder Assembly
189767--1.
This instruction sheet provides recommended
procedures for insulation crimp adjustments, wire
preparation, crimp head installation, crimping, and
maintenance and inspection. For questions
concerning the setup and operation of the pneumatic
tools, see Customer Manual 409--5862.
Read these instructions thoroughly before
proceeding.
NOTE
i
Dimensions are in millimeters [followed by inches
in brackets]. Figures and illustrations are for
reference only and are not drawn to scale.
Reasons for reissue are in Section 7, REVISION
SUMMARY.
PRODUCT
PIDG and PLASTI--GRIP
Ring Tongue
Terminals
PIDG Butt Splices
PIDG FASTON
Terminals
PIDG Insulation
Restriction Ring
Tongue Terminals
PLASTI--BOND
Terminals
WIRE SIZE
(AWG)
STRIP
LENGTH
(+0.40 [+.016])
CRIMP
DOT
CODE
22--16
16--14
5.56 [.219]
1
2
12--10
16--14 HD
8.33 [.328]
1
22--16
16--14
6.75 [.266]
1
2
12--10
9.13 [.359]
1
22--18
16--14
7.94 [.313]
1
2
12--10
8.73 [.344]
1
22--18
16--14
6.75 [.266]
1
2
12--10
9.92 [.391]
1
16--14
7.94 [.313]
2
12--10
8.33 [.328]
1
20--16 HD 5.56 [.219]
2
16--14 HD 8.33 [.328]
1
Figure 2
E2010 Tyco Electronics Corporation, Berwyn, PA
TOOLING ASSISTANCE CENTER 1- 800- 722- 1111
All Rights Reserved
PRODUCT INFORMATION 1- 800- 522- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 5
LOC B