408-4098 Datasheet, PDF (1/5 Pages) Tyco Electronics – Pnuematic Platform Adapters

Pnuematic Platform Adapters
679992- 1 and 679992- 2 (Used with
626 Pneumatic Tooling Assemblies)
Instruction Sheet
408- 4098
12 MAR 10 Rev D
Quick Pin(s)
Rollers
Tool Holder Assembly
189767- 1 (Ref)
Product:
Ultra- Fast Fully Insulated FASTON* Terminals
Ultra- Fast Plus Fully Insulated FASTON Terminals
Wire Size: 26- 14 AWG
Product Catalog: 82042
Tooling Catalog: 124208
Bottom Jaw
Link
Locator
Stop
Pneumatic Platform
Adapter 679992- 1
(Ref)
Top Jaw
Locator
Assembly
Figure 1
1. INTRODUCTION
Pneumatic Platform Adapters 679992--1 (shown in
Figure 1) and 679992--2 are used with 626 Pneumatic
Tooling Assemblies 189721--1, 189722--1, 189723--1,
or 189724--1 when fitted with Tool Holder Assembly
189767--1. The platform adapter accepts the crimping
die assemblies listed in Figure 2 and will crimp
Ultra--Fast FASTON terminals onto wire sizes 26
through 14 AWG.
maintenance and inspection. For information
concerning the setup and operation of the pneumatic
tools, see Customer Manual 409--5862.
Read these instructions thoroughly before
proceeding.
NOTE
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures are
not drawn to scale.
This instruction sheet provides recommended
procedures for insulation crimp adjustments, wire
preparation, crimp head installation, crimping, and
Reasons for reissue are provided in Section 7,
REVISION SUMMARY.
CRIMPING DIE ASSEMBLY
PART
NUMBER
INSTRUCTION COLOR DOT
SHEET
CODE
58052--3
408--9277
Violet
58079--3
Red
408--9278
58080--3
Blue
90390--3
Red
408--9279
90391--3
Blue
TERMINAL
TYPE
Ultra--Fast Fully Insulated FASTON
Terminal
Ultra--Fast Plus Fully Insulated
FASTON Terminal
Ultra--Fast Fully Insulated FASTON
Terminal
Figure 2
CRIMP DOT
CODE
3
NA
NA
1
2
WIRE SIZE
(AWG)
26--22
22--18
16--14
22--18
16--14
E2010 Tyco Electronics Corporation, Berwyn, PA
TOOLING ASSISTANCE CENTER 1- 800- 722- 1111
All Rights Reserved
PRODUCT INFORMATION 1- 800- 522- 6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 5
LOC B