408-10413 Datasheet, PDF (1/6 Pages) Tyco Electronics – Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

NEVALO* Interconnect System
Hand Crimping Tool Kit 2161090-1
Instruction Sheet
408-10413
06 JAN 11 Rev A
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use
and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Multi-Nest Die
Cable Notching
Tool
Hand Crimping Tool
Kit 2161090-1
Right-Angle Die
Short Handle
PRO-CRIMPER*
Tool
Figure 1
1. INTRODUCTION
2. DESCRIPTION (Figure 1)
NEVALO Interconnect System Hand Crimping Tool Kit
2161090-1 (Figure 1) is designed to prepare cable and
crimp connectors for the new NEVALO Interconnect
System.
This tool kit features a short handle PRO-CRIMPER
Hand Tool (2119991-1), a Cable Notching Tool
(2119990-1), and two interchangeable die sets.
NOTE
i
Hand Tool 2119991-1 will only accept Tyco
Electronics dies that are designed for use with the
NEVALO Interconnect System.
This document is intended to provide application and
maintenance procedures for the tool kit. For
information relating to the NEVALO Interconnect
System, consult Application Specification 114-13290.
Read these instructions thoroughly before installing
dies and using the tool kit.
3. DIE INSTALLATION AND REMOVAL (Figure 2)
The dies are designed for quick and tool-less
installation and removal. The short handle
PRO-CRIMPER Hand Tool (2119991-1) has two pins
installed in the die mounting area to retain the dies.
Select the desired die assembly and proceed as
follows:
©2011 Tyco Electronics Corporation, Berwyn, PA
TOOLING ASSISTANCE CENTER 1-800-722-1111
All Rights Reserved
PRODUCT INFORMATION 1-800-522-6752
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names might be trademarks of their respective owners.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
1 of 6
LOC B