408-10366 Datasheet, PDF(1/3 Page) Tyco Electronics – The Electro--Hydraulic Hand Tool and specific DAHT head assemblies must be ordered separately.

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

408-10366 Datasheet, PDF (1/3 Pages) Tyco Electronics – The Electro--Hydraulic Hand Tool and specific DAHT head assemblies must be ordered separately.

Electro- Hydraulic Hand Tool

Adapter Assembly 2119483- 1

DAHT Crimping

Head (Ref)

DAHT Adapter

Assembly

Electro- Hydraulic

Hand Tool

Instruction Sheet

408- 10366

30 JUN 10 Rev A

Quick- Release Pins

Battery Release

Battery

(Power Source)

The DAHT Tool Head is a premium- grade

tool head and is designed primarily for

field installation, repair, maintenance work,

or prototyping in industrial, commercial, or

institutional applications. A wide selection

of powered application equipment for

extended use production is available.

Figure 1

1. INTRODUCTION

The Tyco Electronics Double Action Hand Tool

(DAHT) Adapter Assembly 2119483--1 is designed to

couple any Tyco Electronics DAHT head assembly to

the Electro--Hydraulic Hand Tool (2031400--[ ]). Refer

to Figure 1 to see the hand tool, adapter, and DAHT

tool head.

The Electro--Hydraulic Hand Tool and specific DAHT

head assemblies must be ordered separately.

For specific DAHT crimp head information (including

wire preparation, crimping procedures, maintenance

and inspection procedures, as well as repair and

replacement procedures) refer to the appropriate

instruction sheet for the associated hand tool and

crimping head.

Refer to Customer Manual 409--10095 for information

concerning Electro--Hydraulic Hand Tool 2031400--[ ].

NOTE

All dimensions on this instruction sheet are in

metric units [with inches in brackets]. Figures and

illustrations are for identification only, and are not

drawn to scale.

E2010 Tyco Electronics Corporation, Berwyn, PA

TOOLING ASSISTANCE CENTER 1- 800- 722- 1111

PRODUCT INFORMATION 1- 800- 522- 6752

TE logo and Tyco Electronics are trademarks.

*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

1 of 3

LOC B

▷