4-1415535-9 Datasheet, PDF (1/2 Pages) Tyco Electronics – Miniature PCB Relay PE

General Purpose Relays
PCB Relays
Miniature PCB Relay PE
n 1 pole 5 A, 1 form C (CO) or 1 form A (NO) contact
n Cadmium-free contacts
n Sensitive coil 200mW
n Ambient temperature 85°C
n Low height 10.0mm
n Plastic materials according to IEC 60335-1 (domestic appliances)
SCHRACK
Typical applications
Industrial electronics, white goods, measurement and control
F0169-C
Z
Approvals
VDE REG.-Nr. 6656, UL E214025
Technical data of approved types on request
Contact Data
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
5A
Breaking capacity max.
1250VA
Contact material
Frequency of operation
AgNi 90/10, AgSnO₂
with/without load
360/72000 ops/h
Operate/release time
typ. 8/8ms
Bounce time, form A/form B
typ. 4/6ms
Contact ratings
Type
Contact Load
IEC 61810
PE013
C (CO) 5A, 250VAC, cosφ=1, 85°C
PE014/PE015 C (CO) 5A, 250VAC, cosφ=1, 85°C
PE014/PE015 A (NO) 5A, 30VDC, 0ms, 85°C
PE034
A (NO) 6A, 250VAC, cosφ=1, 70°C
UL 508
PE013
C (CO) 5A, 240VAC, resistive, 85°C
PE014/PE015 C (CO) 5A, 240VAC, resistive, 85°C
PE014
A (NO) 5A, 30VDC, resistive, 85°C
PE034
A (NO) 6A, 250VAC, resistive, 70°C
Mechanical endurance, DC coil
>15x10⁶ operations.
Cycles
30x10³
100x10³
100x10³
50x10³
30x10³
100x10³
100x10³
100x10³
Coil Data
Coil voltage range
Operative range, IEC 61810
5 to 48 VDC
2
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power
VDC
VDC
VDC
Ω±10%
mW
3
3
2.25
0.3
45
200
5
5
3.8
0.5
125
200
6
6
4.5
0.6
172
209
9
9
6.8
0.9
405
200
12
12
9.0
1.2
685
210
24
24
18.0
2.4
2725
211
48
48
36.0
4.8
10970
210
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Initial insulation resistance
1000V_rms
4000V_rms
open contact circuit
>10x10⁹Ω
coil-contact circuit
>10x10⁹Ω
Clearance/creepage
between contact and coil
≥3.2/4mm
Material group of insulation parts
IIIa
Tracking index of relay base
PTI250V
04-2013, Rev. 0413
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions