3EQ1_11 Datasheet, PDF (1/3 Pages) Tyco Electronics – Highest Performance RFI Filters for Switching Power Supplies

Q Series
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
Highest Performance RFI Filters for Switching Power Supplies
Q8
UL Recognized
CSA Certified
VDE Approved
Q1
Q3
Q Series
• Specifically developed for switching power
supplies
• High attenuation for common and differential
mode interference
• Effective from 10kHz to 30MHz
• Optimized for attenuation and size
• 3 or 6A versions available with IEC inlet
Ordering Information
6EQ8M
Suffix
M – Metric inserts (style 8 only)
Omit for standard or none
Input / Output Style
1 – .250 [6.3] spade terminals
3 – Wire leads
8 – IEC inlet* (line side)
Wire leads (load side)
Q Series
Leakage current designation
E – Low leakage (<0.5 mA)
V – Standard
Current Rating
3, 6 or 20A
Specifications
Maximum leakage current each Line to Ground:
3 & 20A
@120 VAC 60 Hz:
@250 VAC 50 Hz:
VQ Models
.73 mA
1.27 mA
EQ Models
.22 mA
.38 mA
6A
@120 VAC 60 Hz:
@250 VAC 50 Hz:
—
.29 mA
—
.51 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage (max):
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
3 to 20A
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Available Part Numbers
3EQ1
3EQ3
3EQ8
3EQ8M
6EQ1
6EQ3
6EQ8
6EQ8M
20EQ1
3VQ1
3VQ3
3VQ8
3VQ8M
20VQ1
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord
*IEC 60320-1 C14 inlet mates with C13 connector
58
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com