3DAF1_11 Datasheet, PDF (1/2 Pages) Tyco Electronics – Compact RFI Line Filter with DC Inlet Connection

Corcom Product Guide
Compact RFI Line Filter with DC Inlet Connection
DA Series
EN
60 950
UL Recognized
CSA Certified
TUV Certified
Catalog: 1654001
Issue Date: 06.2011
DAFP
DAF1
DAS1
DA Series
• General purpose line filters for DC applications up
to 125VDC.
• Compact with a 3-pin inlet connector
• Available in 3, 6, 10 and 15A versions
• Flange mount with 1/4” or PCB terminals
• Mates with a standard MOLEX* connector
(HCS Series)
Ordering Information
3 DA F 1
Output Styles
1 – .250 [6.3] spade terminals
P – PC board mount pins
Specifications
Hipot rating (one minute):
Line to Ground:
LIne to Line:
2250 VDC
1450 VDC
Rated Voltage (max):
125 VDC
Rated Current:
3 to 15A
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +55°C
In an ambient temperature (Ta) higher than +55°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Electrical Schematic
LINE
LOAD
Case Style
F – Flange mount
S – Snap-in
Accessories
DA Series
Current Rating
3, 6, 10 or 15A
Red
Green/Yellow
Black
Available Part Numbers
3DAF1
3DAS1
3DAFP
6DAF1
6DAS1
6DAFP
10DAF1
10DAS1
10DAFP
15DAF1
15DAS1
15DAFP
GA310 – (shown above) Pre-assembled connector
housing and terminals with three 36” long 18 gauge
wires to mate with DA Series filters
MOLEX* connector part numbers:
03-12-1036
Connector housing for DA Series
18-12-1222
Female terminals (3 per connector)
212
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
  
For email, phone or live chat, please go to
te.com/help
corcom.com