3203X102P Datasheet, PDF (1/1 Pages) Tyco Electronics – Type 3203 Series

SMD Trimmers
Type 3203 Series
Type 3203 Series
Consuming just 10.5 sq.mm of
board, the 3203 has been
developed specifically for a new
generation of hand held equipment,
where mixed technology and double
sided component placement are
unavoidable. These 3mm devices are
just 2mm high and sealed for IR,
vapour phase and full immersion wave
soldering together with solvent board
washing process. Also available
within this range is the 3213, the
auto adjust sister to the 3203.
Key Features
I Tiny 3mm Square Size
I Suited to Dip and Wave
Solder
I Latest Cermet Technology
I Suitable for Solvent Washing
I Delta Terminals Prevent
Solder Bridging
I Super Thin - Only 2mm High
I Designed for Auto Adjust
I Packed in Standard 12mm
Tape
Characteristics -
Electrical
Resistance Range:
Resistance Tolerance:
Temperature Coefficient:
Operating Voltage:
Contact Resistance Variation:
Power Rating:
Effective Electrical Angle:
Characteristics -
Mechanical
Rotational Torque:
Mechanical Adjustment:
Characteristics -
Environmental
Temperature Range:
Rotational Life:
Load Life:
Sealing:
Dimensions
3203
100R to 1M (1, 2, 5 in each decade)
± 20%
± 100ppm/°C at -65°C to +150°C
15V DC or AC RMS maximum
5% of nominal maximum
0.05 watts at 70°C
210° nom
5mNm
250° Nom
-55°C to + 150°C
After 100 cycles ∆R < ± 15%
∆R < 5% after 1000 hours
For dip and wave solder, prior to adjustment
How to Order
3203
Common Part
3203 – Screwdriver Slot
X
Orientation
X – Terminals 1 & 3
away from
sprocket holes
102
Resistance Value
The first two digits are
signifigant figures of
resistance value and the
third denotes the number
of zeros following.
e.g. 100R: 101
1K0: 102
10K: 103
P
Tolerance
P - 25 %
Literature No. 1773131
Issued: 04-05
Dimensions are shown for
reference purposes only.
Dimensions are in millimetres Specifications subject to
unless otherwise specified. change.
www.tycoelectronics.com
passives.tycoelectronics.com