20AYP6C_11 Datasheet, PDF (1/3 Pages) Tyco Electronics – High Performance 3-phase RFI Filters for WYE Applications

A Series
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
High Performance 3-phase RFI Filters for WYE Applications
UL Recognized
CSA Certified
VDE Approved
A Series
• For 3-phase, four wire, WYE Applications
• Filters each of the three lines plus the neutral and
ground line
• Both common mode and differential mode
suppression from 50kHz to 30MHz
• Effective for both balanced and unbalanced loads
• Ground choke included
• Optional end bell kits available to shield input and
output terminals
• AYP single stage for lower noise environments
• AYT dual stage provides highest performance
Ordering Information
45 AYT 6 C
Suffix
C – Ground Choke
Input / Output Style
6 – Threaded 1/4 – 20 bolt
Series designation
AYP – Single Stage
AYT – Dual Stage
Specifications
Maximum leakage current, each Line to Ground:
@ 120 VAC 60 Hz:
1.4 mA
@ 250 VAC 50 Hz:
3.4 mA
Hipot rating (one minute):
Line to Ground:
Neutral to Ground:
Line to Neutral:
1500 VAC
1500 VAC
1450 VDC
Rated Voltage (max):
Phase to Phase:
Phase to Neutral / Ground:
440 VAC
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
20 to 60A
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Electrical Schematics
AYP6C Models
LINE
A
LOAD
A
B
B
C
C
Current Rating
20, 30, 45 or 60A
N
LINE
GND
N
LOAD
GND
98
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com