English
Language : 

2-1419136-2 Datasheet, PDF (1/3 Pages) Tyco Electronics – Power Relay RM C/D
General Purpose Relays
Industrial Relays
Power Relay RM C/D
n 1 pole 30/32 A, 1 form X, double make, NO or
1 form Z, double make + double break, NO + NC
n Switching capacity up to 12800VA
n DC or AC coil
n Push-to-test button
n Chassis mount
SCHRACK
Typical applications
Battery chargers, heating control
Z
F0166-B
Approvals
UL E214025, VDE 40003144 for AgNi-versions
Technical data of approved types on request
Contact Data
RMC
RMD
Contact arrangement
1 form Z,
1 form X,
1 NO + 1 NC
1 NO
Rated voltage
400VAC
Max. switching voltage
440VAC
Rated current
30A/32A (VDE)
Limiting making current, max. 20ms
60A
Switching power
7500VA
Contact material
AgCdO, AgNi 90/10
Contact style single bridging contact
Min. recommended contact load
24VDC/100mA
Frequency of operation,
with/without load, DC coil
960/6000h-1
Operate/release time max., DC coil
20/20ms
Bounce time max., form A/form B, DC coil
4/6ms
Contact ratings
Type Contact
Load
Cycles
EN 61810
RMC/D X of Z (NO), AgNi 32A, 400VAC res. 40°C
20x10³
RMC Y of Z (NC), AgNi 32A, 400VAC res. 40°C
10x10³
RMC/D X of Z (NO)
AgNi DC coil
30A, 400VAC res. 50°C
10x10³
RMC/D X of Z (NO)
AgNi AC coil
30A, 400VAC res. 40°C
10x10³
UL 508
RMC/D X/Y (NO/NC),
AgCdO,
30 A, 277 VAC, general purpose 50°C 10x103
RMC/D X/Y (NO/NC)
30 A, 415 VAC, resistive 50°C
10x103
RMC/D X (of Z / NO), AgNi 120 VAC, 0,75 HP 50°C
10x103
RMC/D X/Y (NO/NC)
240 VAC, 2 HP 50°C
6x103
Mechanical endurance
DC coil
10x106 operations
AC coil
10x106 operations
Coil Data
Coil voltage range
Operative range, IEC 61810
Coil insulation system according UL
6 to 220 VDC
6 to 400 VAC
2
class 130 (B)
Coil versions, DC coil
Coil code
Rated
Coil
Rated coil
STD LED PD3) LED+
voltage resistance power
bipolar
PD3)
VDC
Ω±10%1)2)
W
006 L06 0A6 LA6
6
32
1.1
012 L12 0B2 LB2
12
110
1.3
024 L24 0C4 LC4
24
475
1.2
048 L48 0E8 LE8
48
2000
1.2
060 L60 0G0 LG0
60
2850
1.3
110 M10 1B0 MB0
110
100001)
1.2
221 N21 2C1 NC1
220
400002)
1.2
Operate voltage, DC coil 75% of rated coil voltage
Release voltage, DC coil 10% of rated coil voltage
1) Coil resistance ±12%, 2) Coil resistance ±15%
3) Protection diode PD; standard polarity: +A1 / -A2
All figures are given for coil without pre-energization, at ambient temperature +23°C
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions