2-1419108-0 Datasheet, PDF (1/2 Pages) Tyco Electronics – 16 Amp PC Board Miniature Relay

Catalog 1308242
Issued 3-03 (pdf revised 1-06)
P&B
RT series (DC Coil)
16 Amp PC Board
Miniature Relay
File E22575
File LR15734
NR 6106
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent
approvals files of the agencies/laboratories and review them to ensure the
product meets the requirements for a given application.
Features
• SPST through DPDT contact arrangements.
• Immersion cleanable and flux tight versions available.
• VDE 10mm spacing, 5kV dielectric, coil to contacts.
• UL Class F (155°C) coil insulation system.
• Conforms to UL 508, 1873, 353 and 1950.
• Low profile; 15.7mm height.
• Sensitive coil; 400mW.
• Withstand surge voltage of 10,000V.
• Potter & Brumfield or Schrack brand.
Contact Data
Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 2,3.
2 Form A (DPST-NO) Wiring Diagram Code 5.
1 Form C (SPDT) Wiring Diagram Code 1, 2, 3.
2 Form C (DPDT) Wiring Diagram Code 5.
Material: Silver-nickel 90/10.
Minimum Load: 12V/100mA.
Expected Mechanical Life: 10 million operations.
Initial Contact Resistance: 100 milliohms max @ 1A 12VDC.
Designed to meet UL/CSA/VDE ratings @ 25°C with relay
properly vented. Remove vent nib after soldering and
cleaning.
Ratings @ 25°C
Code
NO/NC Load
1
10A/10A @ 277VAC
10A/10A @ 30VDC
12A/12A @ 250VAC
12A/12A @ 30VDC
3/4 HP @ 480VAC*
1/2 HP @ 240VAC*
1/3 HP @ 120VAC*
48 LRA/10 FLA @ 240VAC*
TV-3 @ 120VAC*
A300, 720VA @ 240VAC*
3
16A/16A @ 250VAC
20A/20A @ 277VAC
20A/20A @ 24VDC
16A/16A @ 30VDC
1 HP @ 480VAC*
1 HP @ 240VAC*
1/2 HP @ 120VAC*
60 LRA/10 FLA @ 250VAC*
TV-5 @ 120VAC*
A300, 720VA @ 240VAC*
B300, 360VA @ 240VAC**
5
8A/8A @ 277VAC
8A/8A @ 30VDC
10A/10A @ 250VAC
10A/10A @ 30VDC
1/2 HP @ 240VAC*
1/4 HP @ 120VAC*
34.8 LRA/6 FLA @ 120VAC*
17.4 LRA/5 FLA @ 240VAC*
B300, 360VA @ 240VAC*
TV-3 @120VAC*
Type
Resistive/GP
Resistive
Resistive/GP
Resistive
Motor
Motor
Motor
Motor
Tungsten
Pilot Duty
Resistive/GP
Resistive/GP
Resistive
Resistive
Motor
Motor
Motor
Motor
Tungsten
Pilot Duty
Pilot Duty
Resistive/GP
Resistive
Resistive/GP
Resistive
Motor
Motor
Motor
Motor
Pilot Duty
Tungsten
Operations
100K
100K
30K
30K
6K
6K
6K
30K
25K
30K
50K
30K
30K
30K
6K
6K
6K
30K
25K
30K
30K
100K
100K
30K
30K
6K
6K
30K
30K
30K
25K
* Form A only
** Form B only
Initial Dielectric Strength
Between Open Contacts: >1,000VAC (1 minute).
Between Poles (code 5): >2,500VAC (1 minute).
Between Coil and Contacts: >5,000VAC (1 minute).
Surge Voltage (DC): >10,000VAC x (1.2 x 50 µsec).
Dimensions are shown for
446 reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Coil Data @ 25°C
Voltage: 5 to 110VDC.
Nominal Power @ 25°C: 400mW.
Duty Cycle: Continuous.
Initial Insulation Resistance: 10,000 megohms, min., at 25°C, 500VDC
and 50% rel. humidity.
Coil Construction: UL Class F (155°C).
Coil Data @ 25°C
Nominal
Voltage
VDC
DC
Resistance
in Ohms
±10%
005
62
006
90
009
202
012
360
018
810
024
1,440
048
5,760
060
9,000
110
30,250
Must
Operate
Voltage
VDC
3.5
4.2
6.3
8.4
12.6
16.8
33.6
42.0
77.0
Nominal
Coil
Current
(mA) – 50/60Hz.
80
66.7
44.4
33.3
22.2
16.7
8.3
8.0
4.3
Max. Ambient Temp. vs. Coil Voltage
300
260
220
180
0A
8A
140
12A
16A
100
B
60
A
0
20
40
60
80
100
Max. Allowable Ambient Temp. (°C)
A: Coil temperature = Ambient temperature.
B: 110% of nominal coil voltage at rated contact load.
Operate Data @ 25°C
Must Operate Voltage(DC): 70% of nominal.
Must Release Voltage(DC): 10% of nominal.
Operate Time (Excluding Bounce):
7 ms, typ., 15ms max. at nom. voltage.
Release Time (Excluding Bounce):
3 ms, typ., 6ms max. at nom. voltage.
Environmental Data
Temperature Range:
Storage: -40°C to +105°C.
Operating: -40°C to +85°C at rated current.
Vibration, Operational
N.O.:0.065”(1.65mm) max. excursions from 10 - 55 Hz:
N.C.:0.032”(0.82mm) max. excursions from 10 - 55 Hz:
with no contact opening >10µs.
Mechanical Data
Termination: Printed circuit terminals.
Enclosures: RT 1, 2, 3, 4: Flux-tight, top vented, plastic case.
RT B, C, D, E: Immersion cleanable, plastic case.
Weight: 0.35 oz. (10g) approximately.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.