English
Language : 

2-1419106-8 Datasheet, PDF (1/2 Pages) Tyco Electronics – 10 Amp Dual Coil Latching Relay
Catalog 1308242
Issued 3-03
P&B
KBP series
10 Amp
Dual Coil
Latching Relay
File E29244
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent approvals
files of the agencies/laboratories and review them to ensure the product meets
the requirements for a given application.
Features
• Dual coil latching relay accepts a momentary impulse to one coil to
latch and a second impulse to the other coil to release.
• Enclosed in a clear polycarbonate dust cover.
• AC or DC coils.
• Contacts up to 5PDT.
• Mounts in 11 or 20-pin octal-type plugs.
Contact Data @ +25°C
Arrangements: From 2 Form C (DPDT) to 5 Form C (5PDT),
(3PDT each coil).
Ratings: 10 amps @ 120VAC.
Materials: 10 amp models: Silver-cadmium oxide.
Expected Life: 500,000 operations, mechanical; 50,000 operations
minimum at rated loads.
Coil Data
DC
Coils
(to 5 pole)
AC
Coils
Nominal
Voltage
12
24
48
110
220
Resistance in
Ohms
±10% @ 25°C
Nominal
Current
Milliamperes
52.0
230
850
4560
230
104
56.5
24
Use 110 volt relay with 5000
Ohms, 5 watt resistor in series.
Nominal
Voltage
Resistance in
Ohms
±15% @ 25°C
Nominal
Current
Milliamperes
Up to 4 Pole Relays
24
42
210
120
1030
44
240
4100
22
For 5 Pole Relays
24
27
325
120
700
68
Initial Dielectric Strength
Between Open Contacts: 500V rms.
Between Adjacent Contacts: 1,000V rms.
Between Contacts and Coil: 1,000V rms.
Operate Data @ +25°C
Must-Operate Voltage:
DC: 75% of nominal voltage.
AC: 85% of nominal voltage.
Operate Time: 25 milliseconds excluding bounce.
Environmental Data
Temperature Range:
Storage: 105°C.
Operating: -45°C to +85°C.
Coil Data @ +25°C
Nominal Power:
DC Coils: 2.7W.
AC Coils: 5.3VA to 4 pole; 7.8VA to 5 pole.
Maximum Power: DC coils - 4.0W.
Duty Cycle: Intermittent.
Initial Insulation Resistance: 100 megohms.
Dimensions are shown for
910 reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Mechanical Data
Termination: See terminals table on next page.
Enclosures: Plastic dust cover standard. Hermetically sealed
metal case available on special order.
Weight: 10.8 oz. (306g) approximately.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.