English
Language : 

2-1415529-1 Datasheet, PDF (1/4 Pages) Tyco Electronics – Miniature Relay PT
General Purpose Relays
Industrial Relays
Miniature Relay PT
n 2 pole 12A, 3 pole 10A or 4 pole 6A, 2, 3 or 4 form C (CO) contacts
n DC or AC coil
n Switching performance up to 3000VA
n Relay height 29mm
n Mechanical indicator, optional LED and protection diode
n Manual test tab, optionally lockable
n White marking tabs
SCHRACK
Typical applications
Universal use in control and automation
F0191-B
Approvals
VDE REG.-Nr. 115719, UL E214025, Lloyds 00/20059(E2)
Technical data of approved types on request
Contact Data
PT2
PT3
PT5
Contact arrangement
2 form C 3 form C 4 form C
2 CO
3 CO
4 CO
Rated voltage
240VAC
Max. switching voltage
400VAC 400VAC 240VAC
Rated current
12A
10A
6A
Limiting making current, max. 20ms 24A
20A
12A
Limiting breaking current
12A
10A
6A
Limiting short-time current
300A/30ms
Switching power
3000VA 2500VA 1500VA
Contact material AgNi90/10, AgNi90/10 gold plated
Min. recommended contact load
12V at 10mA
gold plated: 20mV at 1mA
Initial voltage drop 30mV at 100mA/6VDC
Frequency of operation
with/without load
360/36000h-1
Operate time typ., DC coil
15ms
Release time typ., DC coil, without/with PD
10/18ms
Bounce time typ., DC coil, form A/form B
6/8ms
Contact ratings
Type
Contact
Load
IEC 61810
PT 2 DC/AC coil C (CO)
12A, 250VAC, cosφ=1, 70°C
PT 2 DC/AC coil A (NO) of C (CO) 9A, 250VAC, cosφ=1, 80°C
PT 2 DC/AC coil A (NO) of C (CO) 4A, 250VAC, cosφ=1, 80°C
PT 3 DC/AC coil C (CO)
10A, 250VAC, cosφ=1, 70°C
PT 5 DC/AC coil C (CO)
6A, 250VAC, cosφ=1, 70°C
Cycles
70x103
150x103
300x103
100x103
100x103
VZL
Contact Data (continued)
Contact ratings
Type Contact
Load
Cycles
UL 508
PT 2 C (CO)
12A, 250VAC, general purpose, 70°C 6.000
PT 2 C (CO)
12A, 250VAC, resistive, 70°C
100x103
PT 2 A (NO) of C (CO) 12A, 250VAC, resistive, 70°C
100x103
PT 2 A (NO) of C (CO) 12A, 250VAC, resistive, 70°C
100x103
PT 3 C (CO)
10A, 250VAC, general purpose, 70°C 6.000
PT 3 C (CO)
10A, 250VAC, resistive, 70°C
100x103
PT 3 A (NO) of C (CO) 10A, 250VAC, resistive, 70°C
100x103
PT 3 B (NC) of C (CO) 10A, 250VAC, resistive, 70°C
100x103
PT 5 C (CO)
6A, 250VAC, general purpose, 70°C
6.000
PT 5 C (CO)
6A, 250VAC, resistive, 70°C
100x103
PT 5 A (NO) of C (CO) 6A, 250VAC, resistive, 70°C
100x103
PT 5 B (NC) of C (CO) 6A, 250VAC, resistive, 70°C
100x103
EN60947-4-1
PT 2 A (NO) of C (CO) 400VAC, 3.75A, AC3, opposite polarity, 70°C
PT 2 A (NO) of C (CO) 230VAC, 1.7A, AC5b (400W lamp load),
opposite polarity, 70°C
PT 3 A (NO) of C (CO) 250VAC, 2A, AC3, opposite polarity 70°C
PT 3 A (NO) of C (CO) 230VAC, 1.7A, AC5b (400W lamp load),
opposite polarity, 70°C
PT 5 A (NO) of C (CO) 250VAC, 3A, AC3, same polarity 70°C
PT 5 A (NO) of C (CO) 230VAC, 1.7A, AC5b (400W lamp load),
same polarity, 70°C
Mechanical endurance
DC coil
30x106 operations
AC coil
20x106 operations
Coil Data
Coil voltage range
Operative range, IEC 61810
DC coil, AC-coil 50Hz
AC coil 60 Hz at 70°C
Coil insulation system according UL
6 to 220VDC
6 to 230VAC
2
90..110% of rated voltage
class 155 (F)
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions