English
Language : 

2-1393774-7 Datasheet, PDF (1/5 Pages) Tyco Electronics – P1 Relay V23026
Signal Relays
P1 Relay V23026
AXICOM
n Directly triggerable with TTL standard modules as ALS, HCT & ACT
n Slim line 13.5x7.85mm (0.531x0.309”)
n Switching current 1 A
n Bifurcated 1 form C (CO) contact
n Immersion cleanable
AXICOM
n High sensitivity results in low noTmeliencaoml p-,oSwignearl caondnRsuFmReplatiyosn, 65 to
130mW for monostable and 30 to 150mW for bistable (latching)
n Initial surge withstand voltage P1 V23026 Relay
2.5kV (2/10μs) meets the Bellcore Requirement GR-1089
1.5kV (10/160μs) meets FCC Part 68
Contact Data
Typical applications
ANuutommboetirvoefecqouniptamcetsnta, CndANtybpues, imobilizer, office equipment, measurement
and control equipment, medical equipment, safety equipment
Contact assembly
ACponptraocvt amlast erial
ULiLm5it0in8gFicleonNtoin. uEo1u1s1c4u4r1rent at max. ambient temperature
TMecahxniicmaludmatasowf iatpcphrionvgedctuypreres nont request
Maximum swichting voltage
Contact Data
Contact arrangement
MMaaxx.imswuimtchsinwgitvcohlitnaggec apacity
1 form C (CO)
125VDC, 150VAC
RTahteerdmcouerrleenctt ric potential
1A
Limiting continuous current, 85°C
1A
BInreitaiaklincgonctaapcatcrietysmistaaxn. ce / me asurinsgeecomnadxi.tiDonC: l1o0admbAre/a2ki0ngmcVapacity
CEolenctatrcict aml aetnedriaulr ance at 12 V / 10 mA Palladium nickel,
a t 6 V / 100 mA gold-rhodium covered
CMoinn.tarecctosmtymle ended contaa ctt3lo0aVd / 1 000
mA
bifurcated
10mA at
contact
20mV
Initial contact resistance
FMreeqcuheannciycaolf eonpdeurartaionncewithout load
OSUepLte/crreaostneet/taretcilmteareasmteinatgimxs. e max.
≤50mΩ at 10mA/20mV
200 ops./s
2ms
2ms
Bounce time max.
3ms
Electrical endurance
at 12V/10mA
at 6V/100mA
at 30V/1000mA
typ. 50x106 operations
typ. 10x106 operations
typ. 10x103 operations
Contact ratings
UL contact ratings
30VDC/1A
65VDC/0.46A
M Meachxa.nDicaCl en LdouraandceB re ak ing Capactyip1t.5y100V9AoCp/0e.r4a6tioAns
Max. DC load breaking capacity
108-98009 Rev. E
P1_THTSMD
1 changeover contact
Bifurcated contact
Z
Coil DPaatllaad ium n ickel, gold-rhodium covered
Magnetic system 1 A
polarized
Coil voltage range 1 A
3 to 24VDC
other coil voltages on request
Operative range, IEC 61182150 Vdc see coil operative range
Max. coil temperature 150 Va c
85°C
Thermal resistance
30 W, 60 VA
<130K/W
Coil versions, THT, m<on1o0s0taµbVle
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage < 5v0olmtage
voltage resistance power
006
001
005
VDtyCp. 5 x 10V7DoCpmeinr.ationsVDCmin.
Ω ±10%
mW
3typ. 1 x 107 2o.p2e5rations 0.3
137
66
95typ. 1 x 104 36o..p77e55rations
0.5
0.9
370
1165
68
70
002
12
9.00
1.2
2250
34
004
24 typ. 109 o1p8e.0ra0tions 2.4
4500
128
All figures are given for co3il w0itVhoduct p/re1-eAnergization, at ambient temperature +23°C.
Coil
Coil
versionRs,aSteMd1T65,50mVVodanOccop/s/e0t0raa..4bt4e6l6eA A Rele ase Coi l Rated
coil
code
026
voltage
VDC
3
voltage AXvIoCltaOgeM resistance
VDCmin. TelecoVmD-,CSmiginna. l and RΩF R±e1la0ys%
2.25
0.3
113
power
mW
80
021
5
025
9
3.75 P1 V02.53026 R31e3lay 80
6.75
0.9
1015
80
022
12
9.00
1.2
1800
80
024
24
18.00
2.4
4500
128
Coil Operating Range All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coil operative range, monostable DC coil
65 mW
130 mW
Unom
Umax.
Umax. at 0 A
Umax. at 0 A
Umax. at - 1 A
Uop. min.
02-2012, Rev. 0212
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Unom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Urel. min.
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and prodUumcatxd. -a5ta% icsoisl duubtyjeact 1t tAo the
65 mW Latching
Datasheet3s,2pmroWducLtadtcahtain,g‘Definitions’ sec-
1
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions
Umax. - 100 % coil duty at 0 A