English
Language : 

2-1393236-5 Datasheet, PDF (1/3 Pages) Tyco Electronics – Slimline PCB Relay SNR
General Purpose Relays
PCB Relays
Slimline PCB Relay SNR
n 1 pole 6A, 1 form C (CO), 1 form A (NO)
n Only 5mm wide
n Flat pack version available
n Sensitive coil 170mW
n Reinforced insulation (protection classII)
n Strong coil pins for DIN-rail socket
n Allows high function- / packaging density
n Cadmium-free contacts, AgNi 90/10 for AC-loads
SCHRACK
Typical applications
Interface technology, PLC’s, timers, centralized and decentralized heating
control
Z
F0140-D
Approvals
VDE REG.-Nr. 6666, UL E214024
Technical data of approved types on request
Contact Data
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
6A
Limiting making current, max 4s, df 10%
10A
Breaking capacity max.
1500VA
Contact material
AgSnO2,
AgNi 90/10
AgSnO2
gold plated
Min. recommended contact load
100mA, 12V
50mW
Frequency of operation, with/without load
6/1200min-1
Operate/release time max.
12/5ms
Bounce time max., form A/form B
3/8ms
Contact ratings
Type
Contact Load
Cycles
EC 61810
V23092-*****-A301, -A801 C (CO) 6A, 250VAC, cosφ=1, 85°C 5x103
UL 508
V23092-*****-A301, -A801 A/B 6A, 250VAC,
general purpose, 85°C
6x103
V23092-*****-A301, -A801 A/B (NO) B300, 85°C
6x103
V23092-*****-A301, -A801 A/B R300, 85°C
6x103
EN60730-1
V23092-*****-A302
A (NO) 3A (1.5A), 250VAC, 85°C 100x103
V23092-*****-A302, -A802 A (NO) 5A (1.5A), 250VAC, 85°C 10x103
Mechanical endurance, DC coil
10x106 operations
Coil Data
Coil voltage range
Operative range, IEC 61810
5 to 60VDC
2
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power
VDC
VDC
VDC
Ω±10%1)
mW
005
5
3.5
0.25
147
170
012
12
8.4
0.6
848
170
024
24
16.8
1.2
3390
170
048
48
33.6
2.4
106001)
217
060
60
42.0
3.0
205001)
176
1) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
Clearance/creepage
between contact and coil
Material group of insulation parts
Tracking index of relay base
1000Vrms
4000Vrms
≥6/8mm
IIIa
PTI250
10-2012, Rev. 1012
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions