English
Language : 

2-1393147-0 Datasheet, PDF (1/4 Pages) Tyco Electronics – Power Relay RM 2/3/7
General Purpose Relays
Industrial Relays
Power Relay RM 2/3/7
n 2/3 pole 10/16A, 2 form C (CO) or 3 form C (CO) contacts
n Switching capacity up to 6000VA
n DC or AC coil
n Mechanical indicator
n Push-to-test button
n Plug-in version, PCB terminals, chassis- or DIN-rail mount
SCHRACK
Typical applications
Elevator control, power supplies
Z
F0163-B
Approvals
VDE REG.-Nr. 40003144, UL E214025
Technical data of approved types on request
Contact Data
RM2
RM3
RM7
Contact arrangement
2 form C 3 form C 3 form C
2 CO
3 CO
3 CO
Rated voltage
400VAC
Max. switching voltage
440VAC
Rated current
16A
10A
16A
Limiting making current, max. 20ms 40A
40A
40A
Switching power
6000VA 3800VA 6000VA
Contact material
ACdO,
AgCdO, AgCdO
AgNi90/10
in preparation
Min. recommended contact load 24VDC/100mA
Frequency of operation, with/without load
960/6000h-1
Operate/release time max., DC coil
15/10ms
Bounce time max., DC coil, form A/form B
4/10ms
Contact ratings
Type Contact
Load
Cycles
IEC 61810
RM20 C (CO)
16A, 400VAC, cosφ=1, 35°C
100x103
RM22 C (CO)
16A, 400VAC, cosφ=1, DC-coil, 70°C 100x103
RM22 C (CO)
16A, 400VAC, cosφ=1, AC-coil, 60°C
50x103
RM30 C (CO)
10A, 400VAC, cosφ=1, 35°C
100x103
RM70 C (CO)
16A, 400VAC, cosφ=1, 35°C
100x103
UL 508
RM2 A (NO)
16A, 277VAC, general purpose, 50°C
30x103
RM2 A (NO)
16A, 415VAC, resistive, 50°C
100x103
RM20 A (NO)
10A, 48VDC, 50°C
30x103
RM3 C (CO)
10A, 415VAC, resistive, 50°C
100x103
RM30 A (NO)/B (NC) 10A, 277VAC, general purpose, 50°C
30x103
RM7 A (NO)
16A, 415VAC, resistive, 50°C
100x103
RM7 A (NO)/B (NC) 16A, 277VAC, general purpose, 50°C
30x103
Mechanical endurance
DC coil
20x106 operations
AC coil
20x106 operations
Coil Data
Coil voltage range
Operative range, IEC 61810
Coil insulation system according UL
6 to 220VDC
6 to 400VAC
2
class 130 (B)
Coil versions, DC coil
Coil code
Rated
Coil
Rated coil
STD LED PD3) LED+
voltage resistance power
bipolar
PD3)
VDC
Ω±10%1)2)
W
Coil versions, DC coil, RM2, RM3
006 L06 0A6 LA6
6
32
1.1
012 L12 0B2 LB2
12
110
1.3
024 L24 0C4 LC4
24
475
1.2
048 L48 0E8 LE8
48
2000
1.2
060 L60 0G0 LG0
60
2850
1.3
110 M10 1B0 MB0
110
100001)
1.2
221 N21 2C1 NC1
220
400002)
1.2
Coil versions, DC coil, RM7
006 L06 0A6 LA6
6
24
1.5
012 L12 0B2 LB2
12
86
1.7
024 L24 0C4 LC4
24
345
1.7
048 L48 0E8 LE8
48
1340
1.7
060 L60 0G0 LG0
60
2200
1.6
110 M10 1B0 MB0
110
7300
1.7
221 N21 2C1 NC1
220
300002)
1.6
Operate voltage, DC coil 75% of rated coil voltage
Release voltage, DC coil 10% of rated coil voltage
1) Coil resistance ±12%, 2) Coil resistance ±15%
3) Protection diode PD; standard polarity: +A1 / -A2
All figures are given for coil without pre-energization, at ambient temperature +23°C
10-2012, Rev. 1012
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions