2-1393115-7 Datasheet, PDF (1/3 Pages) Tyco Electronics – General Purpose Relays Industrial Relays

General Purpose Relays
Industrial Relays
KUL Series Latching Panel Plug-in Relay
n Magnetic latching relay
n Single or dual wound DC coils or single wound AC coils
n 1, 2, and 3 pole Form C contact arrangement
n Reset occurs by reversing polarity in a single coil relay or by
energizing the reset winding in dual coil relays
n Various mounting and socket styles
Potter & Brumfield
Typical applications
Alarm systems, machine tools, battery chargers, process and power
controls, pressure washers, paving equipment
Approvals
UL E22575; CSA LR15734
Technical data of approved types on request
Contact Data
Contact arrangement
1 form C (CO), 2 form C (CO), 3 form C (CO)
Rated voltage
240VAC
Rated current
10A
Contact material
Ag
AgCdO
Min. recommended contact load 100mA, 12VDC 300mA, 12VDC
Frequency of operation
360 ops./hour
Operate/release time max.
25/25ms
Contact ratings
Type
Load
UL 508
Ag
5A, 240VAC
1/6HP, 120VAC
1/3HP, 240VAC
0.5A, 120VDC
2.5A, 120VAC, tungsten
AgCdO
10A, 250VAC
1/3HP, 120VAC
1/2HP, 250VAC
5A, 120VAC, tungsten
0.5A, 125VDC
10A, 28VDC
10FLA, 30LRA, 125VAC
5FLA, 15LRA, 250VAC
125VA, pilot duty, 125/250VAC
Mechanical endurance
10x10⁶ ops.
Cycles
100x10³
100x10³
100x10³
Coil Data
Coil voltage range
12 to 110VDC (single and dual coil)
24 to 240VAC (single coil)
24 to 120VAC (dual coil)
Coil insulation system according UL
Class B
Coil versions, DC coil 1)
Coil
Rated
Operate
Coil
Rated coil
code
voltage
voltage
resistance
power

VDC
VDC
Ω±10%
W
Single coil
12
12
9.0
120
1.2
24
24
18.0
472
1.25
48
48
36.0
1800
1.3
110
110
82.5
10000
1.25
Dual coil 2)
12
12
9.0
90
1.6
24
24
18.0
350
1.65
48
48
36.0
1400
1.65
110
110
82.5
7400
1.65
1) Latch and reset coil voltages and resistances are the same (unlike coils on request).
2) Dual coil available only with 1 or 2 form C contacts.
All figures are given for coil without preenergization, at ambient temperature +23°C.
Coil versions, AC coil 3)
Coil
Rated
Operate Latch coil Reset coil Reset coil
code
voltage
voltage resistance resistance resistor

VAC
VAC
Ω±15% Ω±15%
Ω
Single coil
24
24
20.4
176
–
680
120
120
102.0
3700
–
15000
240
240
204.0 179000
–
68000
Dual coil
24
24
20.4
100
250
–
120
120
102.0
2525
2200
5600
3) AC coils use diodes. Diodes and resistors included inside relay with 1 and 2 Form C
contacts. For 3 Form C relay, the customer must furnish and wire diodes and resistors
externally (1N4007 is recommended diode).
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Initial insulation resistance
between insulated elements
500V_rms
1500V_rms
1500V_rms
100MΩ
08-2011, Rev. 0811
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions