2-1194945-0 Datasheet, PDF (1/1 Pages) Tyco Electronics – SOLDERSLEEVE, PCB CONNECTOR, 2.16x0.51x6.35 (0.085x0.020x0.250) TERMINAL

SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat shrinkable, transparent blue, radiation cross-linked polyvinylidene
fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
APPLICATION
1. This part will terminate up to three 22 AWG tin or silver plated wires.
2. Sleeve will recover to 1.30 (0.051) max. I.D.
3. Temperature rating: 150°C.
4. This drawing forms part of Raychem Specification Control Drawing D-714-00.
Tyco Electronics Corporation
300 Constitutional Drive
Menlo Park, CA 94025 USA
TITLE :
SOLDERSLEEVE, PCB CONNECTOR,
2.16x0.51x6.35 (0.085x0.020x0.250) TERMINAL
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
DOCUMENT NO.: D-129-03
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
DOC ISSUE:
1
DATE:
08-Feb.-01
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
N/A
DCR NUMBER:
D010033
PROD. REV.:
G
SCALE:
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.