2-1194763-7 Datasheet, PDF (1/1 Pages) Tyco Electronics – COAXIAL SOLDERSLEEVE* DEVICE WITH PRE-INSTALLED LEAD SOLID WIRES

SPECIFICATION CONTROL DRAWING
PART
NAME
PRODUCT
REVISION
B-041-24-N
D
B-041-26-N
D
B-041-28-N
D
B-041-30-N
D
A
min
4.4
(0.175)
PRODUCT DIMENSIONS
B
C
L
min
min
max
2.8
1.6
30
(0.110) (0.060) (1.180)
K
min
150
(5.900)
“GA” = WIRE GAUGE
(AWG)
24
26
28
30
CABLE DIMENSIONS
D
E
F
(G±0.02) (M±0.02)
min
1.7 (0.065) TO 1.5 (0.060) TO
0.3
16
6
4.4 (0.175)
2.8 (0.110)
(0.012) (0.630)
(0.235)
MATERIAL
1. & 6. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.
2. & 5. SOLDER PREFORMS WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
3., 4. & 7. MELTABLE RINGS: Thermally stabilized thermoplastic.
8. CONDUCTOR LEAD: AWG GA (see table). MIL-W-81822/13-GA-9. ETFE insulated silver plated solid conductor.
Color: white.
9. GROUND LEAD: MIL-W-81822/13-GA-G. ETFE insulated, silverplated, solid conductor. Color: blue. GA= Gauge per table.
APPLICATION
A. The parts covered by this SCD are for use in terminating the primary conductor and the braided shield of a coaxial cable
having tin or silverplated conductor and shield, rated for at least 125° C and meeting the dimensional requirements listed.
B. Parts will meet the requirements of Raychem specification RT-1404 when installed per Raychem RPIP-500-03.
For best results, prepare the cable as shown:
Tyco Electronics Corporation
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE IN BETWEEN BRACKETS.
COAXIAL SOLDERSLEEVE* DEVICE
WITH PRE-INSTALLED LEAD
SOLID WIRES
DOCUMENT NO: B-041-GA-N
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
Nov. 23, 1998
DRAWN BY:
R. MAPALO
REPLACES:
B021XYN
DCR NUMBER:
D981933
PROD. REV.
SCALE:
SEE TABLE NONE
If this document is printed it becomes uncontrolled. Check for the latest revision.
DOC ISSUE:
3
SIZE:
A
SHEET:
1 of 1