2-1194651-7 Datasheet, PDF (1/1 Pages) Tyco Electronics – SOLDERSLEEVE DEVICE SHIELD TERMINATION WITH BRAID

SPECIFICATION CONTROL DRAWING
Product Revision
Product
Name
S03-06-R
C
S03-07-R
C
S03-08-R
C
S03-09-R
C
S03-10-R
C
Ident.
Code
S0306R
S0307R
S0308R
S0309R
S0310R
Component Dimensions
L±1.75
øB
øC
(L±0.07) ^min
min
16.50
1.90
2.65
(0.650) (0.070) (0.105)
16.50
2.65
3.68
(0.650) (0.105) (0.145)
16.50
4.30
5.08
(0.650) (0.170) (0.200)
19.10
5.95
6.45
(0.750) (0.235) (0.255)
19.10
7.00
7.60
(0.750) (0.275) (0.300)
H
min
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
Shall Accommodate with Cable Dimensions
øE
øF
øD
max
min
max
2.65
(0.105)
0.90
(0.035)
1.90
(0.075)
3.68
(0.145)
1.40
(0.055)
2.65
(0.105)
5.08
(0.200)
6.45
(0.255)
2.15
(0.085)
3.30
(0.130)
4.30
(0.170)
5.95
(0.235)
7.60
(0.300)
4.30
(0.170)
7.00
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change violet to colorless.
3. MELTABLE RINGS: Stabilized thermoplastic. Color - blue.
4. PRE-INSTALLED BRAID: Nickel plated copper strands. CMA 654.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material.
For compatible insulations, see MIL-S-83519/2 or consult Raychem.
2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem
Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water.
3. Temperature range: -55°C to +150°C.
4. Parts shall be marked with identification code per table.
For best results, prepare
the cable as shown:
SOLDERSLEEVE is a trademark of Tyco Electronics Corporation
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
Raychem
TITLE:
SOLDERSLEEVE DEVICE
SHIELD TERMINATION WITH BRAID
DOCUMENT NO.:
S03-06/-10-R
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS
IN MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
PROD. REV.:
SEE TABLE
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
D982099
DCR NUMBER:
D000418
SCALE:
None
If this document is printed it becomes uncontrolled. Check for the latest revision.
© 2004 Tyco Electronics Corporation. All rights reserved
DOC. ISSUE:
3
SIZE:
A
DATE:
21-Aug-00
SHEET:
1 of 1