1VDK1_11 Datasheet, PDF (1/3 Pages) Tyco Electronics – Enhanced Differential Mode Performance K Series RFI Line Filters

Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
Enhanced Differential Mode Performance K Series RFI Line Filters
DK Series
UL Recognized
CSA Certified
VDE Approved
DK3
DK1
DK6
DK Series
• Higher performance Line to Line attenuation than
the K Series
• E version meets the low leakage current
requirements of VDE portable equipment
and non-patient care equipment
• V version features same high performance
with more cost-effective design
Ordering Information
10 E DK 3
Input / Output Style
1 – .250 [6.3] spade terminals
3 – Wire leads
6 – Threaded bolt
Specifications
Maximum leakage current each Line to Ground:
VDK Models
EDK Models
@ 120 VAC 60 Hz:
.4 mA
.22 mA
@250 VAC 50 Hz:
.7 mA
.38 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage (max):
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
1 to 20A
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
DK Series
Leakage current designation
E – Low leakage (<0.5 mA)
V – Standard
Current Rating
1, 3, 6, 10, or 20A
Electrical Schematic
LINE
LOAD
Available Part Numbers
1VDK1
1VDK3
3VDK1
3VDK3
6VDK1
6VDK3
10VDK1
10VDK3
20VDK1
20VDK6
1EDK1
1EDK3
3EDK1
3EDK3
6EDK1
6EDK3
10EDK1
10EDK3
20EDK1
18
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com