1VDK1 Datasheet, PDF (1/2 Pages) Tyco Electronics – Enhanced Performance K Series RFI Power Line Filters

DK Series
CORCOM Product Guide
Enhanced Performance K Series RFI Power Line Filters
UL Recognized
CSA Certified
VDE Approved
DK3
DK1
DK6
DK Series
The DK series RFI power line filters are general
purpose common mode and differential mode filters
with higher performance line-to-line attenuation than
the VK series.
The E version of the DK series (EDK) has the same high
performance line-to-line attenuation while still meeting the
very low leakage current requirements of VDE portable
equipment and UL544 non-patient care equipment.
The V version of the DK series (VDK) has the same high
performance in a more cost-effective package for
applications without strict leakage current requirements.
Electrical Schematic
LINE
Resistor location for reference only.
LOAD
Specifications
Maximum leakage current, each line-to-ground
VDK Models
@ 120 VAC 60 Hz:
@ 250 VAC 50 Hz:
.4 mA
.7 mA
Hipot rating (one minute):
EDK Models
.22 mA
.38 mA
line-to-ground
line-to-line
2250 VDC
1450 VDC
Operating frequency:
50/60 Hz
Rated voltage (max.):
250 VAC
Rated current:
1VDK/1EDK
1A
3VDK/3EDK
3A
6VDK/6EDK
6A
10VDK/10EDK
10A
20VDK/20EDK
20A
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current
Rating
Frequency-MHz
.15 .5 1 5 10 30
VDK Models
1A, 3A
6A, 10A, 20A
EDK Models
1A, 3A
6A, 10A, 20A
18 30 40 48 48 40
10 22 30 39 44 50
17 27 33 45 45 40
10 19 25 34 40 46
Line-to-line in 50 ohm circuit
Current
Rating
.15
Frequency-MHz
.5 1 5 10 30
VDK, EDK Models
1A, 3A
6A, 10A, 20A
18 47 62 60 50 45
20 43 55 65 60 55
22
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
Germany:
49-89-6089-0
www.corcom.com
www.tycoelectronics.com