1EJT1_11 Datasheet, PDF (1/3 Pages) Tyco Electronics – High Performance Power Inlet Filter

Corcom Product Guide
High Performance Power Inlet Filter
EJT Series
Catalog: 1654001
Issue Date: 06.2011
UL Recognized
CSA Certified
VDE Approved*
EJT1
EJT8
EJT Series
• Superior EMI filter with IEC 60320-1 inlet
• Double three element differential mode circuit
attenuates noise up to 1GHz
• Up to 15A with IEC 60320-1 C14 inlet
• 20A rating with IEC 60320-1 C20 inlet
• Spade terminals or wire leads
Ordering Information
6 EJT 1
Output Styles
1 – .250 [6.3] spade terminals
8 – Wire leads
EJT Series
Current Rating
1, 3, 6, 10, 15 or 20A
Specifications
Maximum leakage current each Line to Ground:
1-15A
20A
@ 120 VAC 60 Hz:
.25 mA
.22 mA
@250 VAC 50 Hz:
.43 mA
.40 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage (max.):
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
1 to 20A*
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord
3
Available Part Numbers
1EJT1
3EJT1
6EJT1
10EJT1
15EJT1
20EJT1
1EJT8
3EJT8
6EJT8
10EJT8
15EJT8
20EJT8
FA601: Insulating Shroud (fits 1-15A only)
.413 _Dia.
10.5
.271 _Dia.
6.9
*15A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 10A, 250VAC.
20A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 16A, 250VAC.
.118
3.0
1.39
35.4
1.17
29.7
.767
19.5
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
163
For email, phone or live chat, please go to
te.com/help
corcom.com