1EF1F_11 Datasheet, PDF (1/3 Pages) Tyco Electronics – EMI Power Inlet Filter

Corcom Product Guide
EMI Power Inlet Filter
EF Series
Catalog: 1654001
Issue Date: 06.2011
UL Recognized
CSA Certified
VDE Approved*
EF8
EF1F / EF1FC
EF4
EF2F
EF Series
Specifications
• Compact single stage EMI filter with IEC 60320-1
C14 inlet
• Two element circuit provides basic attenuation
• Available with an internal ground-circuit inductor
(C suffix versions) to isolate equipment chassis
from power line ground at radio frequencies
• Superseded by the EEA Series
Ordering Information
3 EF 1F C
Ground Circuit Inductor
Omit if none
Output Styles
1F – .250 [6.3] spade terminals
(back)
2F – .250 [6.3] spade terminals
(bottom)
4 – Wire leads (bottom)
8 – Wire leads (back)
Maximum leakage current each Line to Ground:
@ 120 VAC 60 Hz:
.21 mA
@250 VAC 50 Hz:
.36 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage (max.):
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
1 to 15A*
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord
EF Series
Current Rating
1, 3, 6, 10 or 15A
Available Part Numbers
1EF1F
3EF1F
6EF1F
10EF1F
15EF1F
1EF2F
3EF2F
6EF2F
1EF4
3EF4
6EF4
1EF8
3EF8
6EF8
Ground Circuit Inductor Versions
10EF1FC
FA601: Insulating Shroud
.118
3.0
.413 _Dia.
10.5
.271 _Dia.
6.9
1.17
29.7
1.39
35.4
.767
19.5
*15A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 10A, 250VAC
160
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com