1ED1_11 Datasheet, PDF (1/4 Pages) Tyco Electronics – Medium Performance Compact EMI Power Inlet Filter

Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
Medium Performance Compact EMI Power Inlet Filter
ED Series
UL Recognized
CSA Certified
VDE Approved*
ED1 / ED1C
ED2
EC8 / ED8C
EC4 / ED4C
ED Series
• Two element circuit provides medium attenuation
• Available with an internal ground-circuit inductor
(C versions) to isolate equipment chassis from
power line ground at radio frequencies
• Versions up to 15A*
• Similar to EEJ Series with alternative termination
options
• See the EC Series for better differential mode
performance
Ordering Information
3 ED 1 C
Ground Circuit Inductor
Omit if none
Output Styles
1 – .250 [6.3] spade terminals
(back)
2 – .250 [6.3] spade terminals
(bottom)
4 – Wire leads (bottom)
8 – Wire leads (back)
ED Series
Specifications
Maximum leakage current each Line to Ground:
@ 120 VAC 60 Hz:
.22 mA
@250 VAC 50 Hz:
.38 mA
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Rated Voltage (max.):
250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
1 to 15A*
Operating Ambient Temperature Range
(at rated current Ir):
-10°C to +40°C
In an ambient temperature (Ta) higher than +40°C
the
maximum
operating
current (Io)
follows: Io
is calculated as
= Ir (85-Ta)/45
Available Part Numbers
1ED1
3ED1
6ED1
10ED1
15ED1
1ED2
3ED2
6ED2
1ED4
3ED4
6ED4
1ED8
3ED8
6ED8
15ED8
Ground Circuit Inductor Versions
6ED1C
10ED1C
6ED4C 6ED8C
Current Rating
1, 3, 6, 10 or 15A
Electrical Schematic
LINE
1
LOAD
144
*15A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 10A, 250VAC
Note 1: CNoveters1i:onCsVoenrlsyions only
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com