English
Language : 

1CUFE1 Datasheet, PDF (1/4 Pages) Tyco Electronics – Compact 1U Height Switched Power Entry Module
Corcom Product Guide
Compact 1U Height Switched Power Entry Module
CU Series
Catalog: 1654001
Issue Date: 06.2011
UL Recognized
CSA Certified
VDE Approved*
6CUFS1
15CUE1
CU Series
• Designed for popular 1U (1 ¾”) height rack
mounted equipment
• Two function power entry module combining
a SPST switch and an IEC 60320-1 inlet
• Snap–in, flange and flush mounting
• Reduce OEM wiring time with optional
pre–connected line and switch terminals
Ordering Information
15 CU 10 B S 1
Output Styles
1 – .187 [4.8] spade terminals
Specifications
Maximum leakage current each Line to Ground:
Filtered
Unfiltered
@ 120 VAC 60 Hz:
.25 mA
2 A
@250 VAC 50 Hz:
.40 mA
5 A
Hipot rating (one minute):
Line to Ground:
Line to Line:
2250 VDC
1450 VDC
Operating Voltage:
120/250 VAC
Operating Frequency:
50/60 Hz
Rated Current:
1 to 15A*
Switch:
50A inrush capable SPST
Terminal Push–on Force:
15 lb. / 67N (max.)
Mounting Styles
E – Flange Mount (Horizontal)
F – Flush Mount (Filtered only)
S – Snap–in
Filter Type or Terminal Option
F – General purpose
B – No filter, includes
pre–connected terminals
Omit if none
Side Snap–in Option
Non-filtered versions only
10 – Side snaps 1.0mm max. panel
15 – Side snaps 1.5mm max. panel
Omit for none or
standard configuration
Available Part Numbers
1CUFE1
3CUFE1
6CUFE1
10CUFE1
15CUFE1
Filtered Versions
1CUFF1
3CUFF1
6CUFF1
10CUFF1
15CUFF1
1CUFS1
3CUFS1
6CUFS1
10CUFS1
15CUFS1
Non–filtered Versions
Standard Terminals
Pre-connected Terminals
15CUE1
15CUBE1
15CUS1
15CUBS1
15CU10S1
15CU10BS1
15CU15S1
15CU15BS1
CU Series
Current Rating
1, 3, 6, 10 or 15A
*15A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 10A, 250VAC
134
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
For email, phone or live chat, please go to
te.com/help
corcom.com