1924463 Datasheet, PDF (1/34 Pages) Tyco Electronics – AMPSEAL 16 Connector System

AMPSEAL 16 Connector System
Introduction
Section Catalog 1654281-2.
Revised 12-2009.
Main Catalog 1654400-1
Chapter 30 – Issued 3-2010.
Product Features
■ Keyed / polarized,
prevents mismating
■ Lanceless contacts,
no damaged tangs or
tangled contacts
■ Integral CPA protects against
accidental unlocking
■ Sleeved assembly for contact
beam protection provides
50 durability cycles
■ Attachment feature on pin
housing provides connector
clip mounting
■ Integral PLR provides primary
latch reinforcement with no
additional assembly
■ Sealing of interface and wires
provides for environmental
integrity
■ Resistant to a wide range
of chemicals
■ RoHS and ELV compliant
The AMPSEAL 16 Connector This connector family will
System is targeted for off-
feature the HDSF Size 16
road, heavy duty industrial,
Pin and Socket contacts as
recreational and agricultural
a terminal system.
applications. This wire-to-wire
and wire-to-device connector
line was designed to meet
the rigorous demands of an
industry that requires the
highest standards in perform-
ance.
These contacts are stamped
and formed versions of the
screw machined MIL-C-39029
contacts. The 2-, 3-, 4-, 6-, 8-
and 12-position housings will
offer a one-piece assembly
for both plug and cap.
SUPERSEDED Thermoplastic housings
(–40 °C to +125 °C rated) and
silicone seals allow the con-
nectors to withstand extreme
temperatures and moisture.
NOT the LATEST
REVISION
All specifications subject to change. Consult Tyco Electronics for latest specifications.
30-1