1888116-2 Datasheet, PDF (1/3 Pages) Tyco Electronics – XFP Products

Pluggable Input / Output Solutions
XFP Products
Product Facts
I 10 Gb/s serial link
I EMI containment features
I Module to XFP Cage
I XFP Cage to Chassis
I Uses 30 pin surface mount
connector
I Patented riding heat sink for
thermal management
I Press fit cage termination
I Designed to support
belly-to-belly applications
I UL/CSA Report
R
File E28476
R
Technical Documents
Instruction Sheet
408-8723
Application Specification
114-13096
Product Specifications
108-2127
XFP Standard
SFF Document INF-8077
XFP was developed to pro-
vide 10Gb/s serial links for a
wide range of applications
including standards such as
OC192/STM-64, G.709, and
10 Gigabit Ethernet.
The cage /plug interface
features an intuitive latch
system, gasketing features
for excellent EMI contain-
ment, and was the first
pluggable interface to
incorporate patented riding
heat sink technology for
thermal dissipation. The
heat sink is mounted to the
cage using a clip, which
provides a load to maintain
contact between heat sink
and module. Heat sinks are
available in three heights,
and custom heat sinks are
possible. This heat sink
technology has extended to
SFP and QSFP applications.
The XFP connector is a 30
position PT connector, using
the same design as used
in SFP for established
performance and reliability.
Cages
Part Number
1489951-1
1658871-1
1888101-1
1658945-1
1888116-1
1888116-2
1888065-1
1888481-1
1888481-2
1888481-3
Description
XFP Cage
XFP Cage w/Insulating Tape
XFP Cage without Rear Gasket
XFP Cage w/Insulating Tape & without Rear Gasket
XFP Kit: XFP Cage with SAN Heat Sink (6.5mm)
XFP Kit: XFP Cage with PCI Heat Sink (4.2mm)
XFP Kit: XFP Cage with Networking Heat Sink (13.5mm)
XFP Kit: XFP Cage w/insulating tape and SAN Heat Sink (6.5mm)
XFP Kit: XFP Cage w/insulating tape and PCI Heat Sink (4.2mm)
XFP Kit: XFP Cage w/insulating tape w/Networking Heat Sink (13.5mm)
PCB
Attachment
Press Fit
Press Fit
Press Fit
Press Fit
Press Fit
Press Fit
Press Fit
Press Fit
Press Fit
Press Fit
Connectors, Heatsinks, and Accessories
Part Number
788862-1
788862-2
1367500-1
1489948-2
1888810-2
1542656-2
1542618-2
1542706-2
Description
30 Pos SMT XFP Conn. 0.38 µm (15 µin) gold plating
30 Pos SMT XFP Conn, 0.76 µm (30 µin) gold plating
30 Pos SMT XFP Conn, 0.76 µm (30 µin) gold plating
with contact treatment, and enhanced contact for
high speed signals
XFP Heat Sink Clip
XFP EMI/Dust Plug
SAN Heat Sink (6.5mm)
PCI Heat Sink (4.2mm)
Networking Heat Sink (13.5mm)
PCI is a trademark of PCI-SIG.
Note: All part numbers are RoHS compliant.
Catalog 1773408-1
Revised 2-09
www.tycoelectronics.com
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
25
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208