1308028-2 Datasheet, PDF (1/6 Pages) Tyco Electronics – Limiting continuous current 32 A at 85°C

PCB Relays
Single Relays
VKP (Open – Sealed)
Catalog 1308028-2
Revised 6-2009
Features
– Limiting continuous
current 32 A at 85°C
– Wide voltage range
Typical Applications
– ABS control
– Blower fans
– Car alarm
– Cooling fan
– Engine control
– Fuel pump
– Hazard warning signal
– Heated front screen
– Heated rear screen
– Ignition
– Lamps front, rear, fog light
– Interior lights
– Main switch/supply relay
– Seat control
– Seatbelt pretensioner
– Sun roof
– Turn signal
– Valves
– Window lifter
– Wiper control
Please contact Tyco Electronics
for relay application support.
Design
– ELV compliant
– Open: flux tight type
– Sealed: washable type
Weight
– Approx. 19 g (0.67 oz.)
open version
– Approx. 22 g (0.77 oz.)
sealed version
Nominal Voltage
12 V or 24 V
Terminals
PCB terminals, for assembly on
printed circuit boards
VKP_3d01
Conditions
All parametric, environmental and
endurance tests are performed
according to EIA Standard RS-407-A
at standard test conditions unless
otherwise noted:
23°C ambient temperature,
20 - 50% RH, 998.9 ±33.9 hPa.
For general storage and processing
recommendations please refer to our
Application Notes and especially to
Storage in the “Glossary” page 23 or
at http://relays.tycoelectronics.com/
appnotes/
Disclaimer
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of the
relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and to request
our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without notification.
All rights of Tyco Electronics are reserved.
156
All specifications subject to change. Consult Tyco Electronics for latest specifications.