1001 Datasheet, PDF(1/1 Page) Schurter Inc. – IEC Appliance Inlet C14, Screw-on Mounting, Rear Side, PCB Terminal

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

1001 Datasheet, PDF (1/1 Pages) Schurter Inc. – IEC Appliance Inlet C14, Screw-on Mounting, Rear Side, PCB Terminal

WILMARâ¢ Protective Relays â 1000 Series

TERMINAL STRIPS

#6 - 32 SCREWS

3 13/16

1 /2

11/64" DIA.

4 MTG. HOLES

Note: Dimensions in inches. Multiply values by 25.4 for dimensions in mm.

Phase Failure Relays

Function: 47

â¢ ANSI/IEEE C37.90-1978

â¢ UL file No. E58048

â¢ CSA file No. LR61158

Phase failure relays protect motors, equipment and

personnel from damage or injury caused by open

phase, reversed phase sequence, or low voltage in a

three phase system. Models are available for 50 and

60 Hz with voltages up to 575 volts. Motor control

switchboards are a common application.

Operation:

The contacts of the relay will close only when it

senses normal conditions of three phase power at

the proper phase sequence.

The relay contacts will remain in their normally open

position (de-energized) when voltage with incorrect

phase sequence is applied, one or more phases are

open, or at undervoltage condition.

PART NUMBER SELECTION

Part Number

PRODUCT SPECIFICATIONS

1000 Series

Nominal Voltage ............................. See Table

Voltage Drop-Out ........................... 75% to 100% of nominal, screwdriver adjustable

Pick-Up to Drop-Out Differential .... 3% approx.

Ambient Operating Temperature .... -40oC to +70oC

Temperature Drift ........................... Â± 1%

Time Delay ..................................... See Curve

Output Contacts ............................. One set, normally open

PART NUMBER SELECTION

Sample Part No.

1004X

Type:

1001 = 120 V, 60 Hz, 3 phase,L-L

1007 = 208 V, 60 Hz, 3 phase, L-L

1002 = 230 V, 60 Hz, 3 phase,L-L

1012 = 300 V, 60 Hz, 3 phase, L-L

1013 = 350 V, 60 Hz, 3 phase, L-L

1003 = 380 V, 50 Hz, 3 phase, L-L

1004 = 460 V, 60 Hz, 3 phase,L-L

1005 = 525 V, 60 Hz, 3 phase,L-L

1006 = 575 V, 60 Hz, 3 Phase, L-L

Mounting:

X = Flange

Blank - Stud

Consult factory for additional models and options

Contact Ratings .............................. 10 amp at 28 VDC resistive

10 amp at 230 VAC resistive

Notes:

1. Remove screw for access to the undervoltage

adjustment.

2. Clockwise rotation of the adjustment

potentiometer will raise the drop-out voltage.

Tyco Electronics / www.tycoelectronics.com / Factory Direct Technical Support: 800-253-4560, ext. 2023 (U.S., Canada, Mexico) or 805-220-2020, ext. 2023 (International)