1-338086-3 Datasheet, PDF (1/7 Pages) Tyco Electronics – Single Port Modular Jacks

Modular Jacks and MRJ21 Product
Single Port Modular Jacks
Product Facts
■ Meets or exceeds FCC Part
68 rules and regulations;
REA PE-76; and UL 1863,
Communication Circuit
Accessories
■ Meets 1000 volt dielectric
requirement Contact to
Contact
■ Available in both top and
side entry (Right-Angle)
■ Designed for direct mount-
ing on pc boards
■ Designed for ease of solder-
ing and board cleaning
■ Available in both shielded
and unshielded versions
■ Shielded jack available with
two grounding paths - pc
board and panel
■ 20 dB shielding effective-
ness from 30 MHz to 400
MHz
■ Selectively gold plated con-
tacts for lower cost
■ All jacks are UL 94V-0 flame
retardant polyester, stan-
dard color black, unless
specified otherwise
■ Listed by Underwriters
Laboratories Inc.,
File No. E81956
R
■ Certified by Canadian
Standards Association, ^R
File No. LR 7189A
■ Produced under a Quality
Management System
Certified to ISO 9001
A copy of the
certificate is available
upon request
Specifications
Electrical
Current Rating — 1.5 amp max. @
25°C, derated to 0.2 amp max. @ 70°C
ambient
Voltage Rating — 150 volts AC max.
Dielectric Withstanding Voltage —
1000 VAC, RMS, 60 Hz, 1 min. Contact
to Contact
Mechanical
PC Board Retention — will not
dislodge from pc board when subjected
to 1 lb. [4.4N] pull before soldering and
10 lb. [44N] pull after soldering
Durability — 750 mating cycles
Material and Finish
Housing — Through-hole: Polyester
(wave solder compatible), UL 94V-0
rated; Surface Mount: Polyphenylene
Sulfide, or High Temp Nylon, UL 94V-0
rated
Contact — .014 [0.36] thk. Phosphor
bronze; plated .000050 [0.00127] gold
in contact area and .000150 [0.00381]
tin-lead on solder tails, over .000050
[0.00127] nickel underplate
Technical Documents
Application Specifications
114-02048
114-6040
Product Specifications
108-01163
108-01163-1
108-01163-3
108-01163-4
108-01163-7
Catalog 82066
Revised 11-07
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
9
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208