063725P011 Datasheet, PDF (1/3 Pages) Tyco Electronics – Flame-retardant, adhesive-lined heat-shrinkable tubing (extended temperature range)

ES2000
Flame-retardant, adhesive-lined heat-shrinkable
tubing (extended temperature range)
Adhesive-lined ES2000 heat-
shrinkable tubing is specifically
designed to meet automotive industry
requirements for environmental
sealing and electrical insulation of
automotive wire splices, terminations,
and components.
ES2000 tubing has an outer jacket
of radiation-crosslinked, semirigid
polyolefin. Flame-retardant and
mechanically tough, the jacket
provides strain relief and abrasion
protection of wire splices and
mechanically sensitive components.
The inner layer of the tubing is a
unique hot-melt adhesive, specially
formulated to adhere to all major
types of automotive wire insulation
and to perform well at an extended
temperature range. The adhesive
forms an effective barrier against
automotive fluids and moisture,
helping to protect the harness
from the effects of corrosion and
water wicking.
Because ES2000 tubing has a high
shrink ratio, only a few sizes are
needed to cover a wide range of
splice and component diameters.
ES2000 tubing dimensions have been
engineered to provide low-cost
sealing solutions on multiple-wire
splices (up to seven wires per side),
using standard Tyco Electronics
application equipment.
Temperature rating
Full recovery temperature:
Continuous operating temperature:
135°C
–40°C to 130°C
Specifications*
Type
ES2000
Raychem
RT-1112
*When ordering, always specify latest issue.

UL
E85381
Dimensions (millimeters/inches)
Expanded as supplied
Fully recovered
after heating
D
W1 W2
d
W
Inside diameter (including core)
D (min.)
d (max.)
Expanded
Recovered after
Part number
as supplied
heating
ES2000-No.1
5.72 0.225
1.27 0.050
ES2000-No.2
7.44 0.293
1.65 0.065
ES2000-No.3
10.85 0.427
2.41 0.095
ES2000-No.4
17.78 0.700
4.45 0.175
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Recovered wall thickness**
W
W1
Minimum
Minimum
total wall
jacket wall
1.20 0.047
0.64 0.025
1.52 0.060
0.76 0.030
1.91 0.075
0.89 0.035
2.41 0.095
1.04 0.041
Ordering information
Color
Size selection
Standard packaging
Marking
Ordering description
Black
Consult manufacturer’s recommended size selection guidelines.
Cut pieces. See reverse for information on standard cut lengths.
Tubing will be marked with the number size (for example, ES-1, ES-2, ES-3, or ES-4).
Specify product name, size, color, and cut length; for example, ES2000-No.2-0-50MM (0=Black).
W2
Minimum
adhesive wall
0.56 0.022
0.76 0.030
1.02 0.040
1.37 0.054