021174-000 Datasheet, PDF (1/1 Pages) Tyco Electronics – SOLDERSLEEVE* DEVICE WITH PRE-INSTALLED LEAD IMMERSION RESISTANT

SPECIFICATION CONTROL DRAWING
Product Revision
Product Dimensions
Cable Dimensions
Product
Ident. A1.75
øB
øC
H
øE
øF
øG
øD
Name
Code _{(A0.07)} min
min
min
max min
min
max
SO63-1-55-GA-CL * SO631R 16.5
1.90 2.65 8.25 2.65 0.90 0.50 1.90
(0.650) (0.075) (0.105) (0.325) (0.105) (0.035) (0.020) (0.075)
SO63-2-55-GA-CL * SO632R 16.5
2.65 3.68 8.25 3.68 1.40 0.75 2.65
(0.650) (0.105) (0.145) (0.325) (0.145) (0.055) (0.030) (0.105)
SO63-3-55-GA-CL * SO633R 16.5
4.30 5.08 8.25 5.08 2.15 1.25 4.30
(0.650) (0.170) (0.200) (0.325) (0.200) (0.085) (0.050) (0.170)
SO63-4-55-GA-CL * SO634R 19.1
5.95 6.45 8.25 6.45 3.30 1.80 5.95
(0.750) (0.235) (0.255) (0.325) (0.255) (0.130) (0.070) (0.235)
SO63-5-55-GA-CL * SO635R 19.1
7.00
7.6
8.25
7.6
4.30
2.50 7.00
(0.750) (0.275) (0.300) (0.325) (0.300) (0.170) (0.100) (0.275)
* Consult Raychem for individual product revision. Contains more than 1 part name.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Fusible ring, melt point: 221C.
3. MELTABLE RING: Environment resistant thermoplastic. Color:blue.
4. GROUND LEAD: MIL-W-22759/32-GA-CL. See part number guide for gauge and color information.
J0.5
(J0.02)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)
APPLICATION
1. These parts will provide a shield termination assembly which will meet the requirements of MIL-S-83519/2 when installed in
accordance with Raychem RCPS-100-70 on cables rated for at least 125C, meeting the dimensional criteria listed, having tin or
silver plated shields. See M83519 or consult Raychem for compatible insulation material.
2. Temperature rating: -55C to +150C.
For best results, prepare the cable as shown:
Part Number Guide:
SO63-A-55-GA-CL
Parts shall be noted with identification code per table.
“G” is the minimum diameter on which the sleeve will seal.
Lead color designation per MIL-STD-681.
Standard color: -90 white with black stripe.
For availability of other colors, consult Raychem.
Lead AWG 18, 20, 22, 24, 26.
Lead type: M22759/32 (Raychem 55A0111).
Size 1 to 5.
* A trademark of TE Connectivity.
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
TITLE: SOLDERSLEEVE* DEVICE
WITH PRE-INSTALLED LEAD
IMMERSION RESISTANT
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: SO63-A-55-GA-CL
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
16-Apr-11
DOC ISSUE:
8
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
D981087
DCR NUMBER:
D981962
PROD. REV.:
SEE TABLE
SCALE: SIZE: SHEET:
None A 1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.