003833-000 Datasheet, PDF (1/3 Pages) Tyco Electronics – TECHNICAL DATA SHEET

TECHNICAL DATA SHEET
RayMark Six labels
MATERIAL DESCRIPTION:
USE:
PRINT METHOD/RIBBON:
CURING CONDITIONS:
SHELF LIFE/STORAGE
CONDITIONS:
SERVICE TEMPERATURE:
INSTALLATION TEMP:
COLORS:
Computer-printable zero halogen label material. Permanent pressure sensitive
acrylic adhesive. Thermally stabilised white polyester film with special ink
receptive latent cure epoxy coating on the label surface. After printing, the
surface is heat cured, embedding the image within a tough polymeric layer.
RayMark Six labels have outstanding abrasion and fluid resistance without the
need for an overlay. Ideal for applications where high performance variable
data labels are needed, for example in defence, marine, rail and aerospace
applications. Can be used as a wire/cable wraparound marker for substrates
not less than 6mm (0.25 inches) diameter. Not recommended for outdoor use.
Dot Matrix: Tyco LQ870, Tyco TMS-SYSTEM-SIX-RIBBON-A.
5 minutes at 150ºC (302ºF) in an air circulating oven. Small curing unit with
automatic drive available (“Permatizer”). Curing also possible with hot air gun.
Contact Tyco for details.
Can be stored unopened for 12 months at temperatures not exceeding 35ºC
(95ºF).
Once opened, product should be stored below 25ºC (77ºF) and 80% relative
humidity and used within 6 months.
Wiring marking: -40ºC to +85ºC (-40ºF to +185ºF) continuous.
Panel marking: -40ºC to +105º (-40ºF to +221ºF) continuous.
Excursion Temperature: 200ºC (392ºF) for 2 hours.
+10^°C to +40^°C (+50^°F to +104^°F).
White.
www.idento.com
Document number: TTDS-032 Date: Octobeter 2001
Issue: 1
Pages: 3
Business locations:
 N America: + 1 650 361 3860 (West Coast)
 Germany: + 49 (0) 6074 89080
 UK: + 44 (0) 1495 244000 (Labels)
 Japan: + 81 (0) 44 900 5102
 N America: + 1 401 751 6505 (East Coast)
 France: + 33 (0) 476 099696
 UK: + 44 (0) 1793 528171 (Other products)
 Singapore: + 65 (0) 4866 151
All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their
application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics
only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or
consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco
Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable
specification.