28953-SWG-001-A_15 Datasheet, PDF (96/183 Pages) M/A-COM Technology Solutions, Inc. – Application and Channel Unit Software

8.0 API Command Set
8.1 Level 3 API Commands
RS8953B
Application and Channel Unit Software Developer’s Guide
8.1.2.4 DSL ZipStartup Status
Table 8-8. Opcode: 0x84 (_DSL_ZIP_STATUS)
Destination
Description
_DSL_CHANNEL0–2
Return the ZipStartup status.
Bit 4–7
Bit 1–3
Reserved
Zip_start_state
Parameter
0x00 (_LOCAL)
Bit 0
Enable
Enabled:
0 – ZipStartup is disabled
1 – ZipStartup is enabled
Zip_start_state:
0 – ZIP_START_IDLE
1 – ZIP_START_VALIDATION_STATE0
2 – ZIP_START_VALIDATION_STATE1
3 – ZIP_START_UPDATE_STATE
4 – ZIP_START_WAIT_STATE
8.1.2.5 DSL Version
Table 8-9. Opcode: 0x81 (_DSL_VERSION)
Destination
Description
_DSL_APPLICATION
Return the system version.
Parameter
_DSL_SW_VERSION (0x00)
_DSL_HW_VERSION (0x01)
The actual software version is the return value divided by 10. For instance, if the return value is 12,
the software version is 1.2.
8.1.3 Performance Monitoring
Channel Unit Code 6.0 maintains CRC and FEBE error history at three different intervals. See
Section 6.8 for more information.
8.1.3.1 Enable or Disable Performance Monitoring Update
Table 8-10. Opcode: 0x10 (_SET_PERFMONITOR_STATE)
Destination
Description
_DSL_CHANNEL0–2
Enable or disable the performance monitoring
update.
Parameter
0x00 (disable)
0x01 (enable)
8-6
Conexant
100418C