English
Language : 

MAMO-00900-1291HT Datasheet, PDF (5/7 Pages) M/A-COM Technology Solutions, Inc. – I/Q Modulator/Demodulator 850-960 MHz
MAMO-00900-1291HT
I/Q Modulator/Demodulator
850-960 MHz
Rev. V3
Electrical Specifications (Demodulator) @ +25 °C, Z0 = 50Ω
Parameter
Conversion Loss
Amplitude
Imbalance
Phase
Imbalance6
Input IP3
Input 1dB
Compression
IF Bandwidth
LO Return Loss
RF Return Loss
Frequency Range
900 MHz
850-960 MHz
850-960 MHz
850-960 MHz
850-960 MHz
900 MHz
850-960 MHz
-
850-960 MHz
850-960 MHz
Test Conditions
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
LO Drive = +19 dBm
RF Input = -7 dBm (each tone)
Tone 1 is 10 MHz above LO Freq
Tone 2 is 11 MHz above LO Freq
LO Drive = +19 dBm
FRF = FLO + 0.4 MHz
850 MHz ≤ LO ≤ 970 MHz
FRF = FLO + FIF; 0 ≤ FIF ≤ 65 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
LO Drive = +19 dBm
RF Input = -7 dBm
FRF = FLO + 0.4 MHz
Units
dB
dB
deg
dBm
dBm
MHz
dB
dB
Min
-
-
-
-
30
14.5
65
19
6
Typ
Max
12
13
12.6
14
0.05
0.3
1.0
3.0
35
-
16
-
-
-
26
-
9
-
6. When the LO frequency is greater than the RF frequency, the “Q” output leads the “I” output by 90 degrees nominal.
Demodulator Conversion Loss 850-960 MHz
-11
-12
PLO = 20dBm
PLO = 17dBm
-13
PLO = 19dBm
-14
850 860 870 880 890 900 910 920 930 940 950 960
FREQUENCY (MHz)
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.