MA4ST200 Datasheet, PDF (5/5 Pages) Tyco Electronics – Low-Voltage / High Q Si Hyperabrupt Varactors

MA4ST200 Series
Low-Voltage / High Q Si Hyperabrupt Varactors
Rev. V5
Mounting Information
The illustration indicates the recommended
mounting pad configuration for the SC-79, SC70
3LD and SOD-323 packages. Solder paste
containing flux should be screened onto the pads to
a thickness of 0.005- 0.007 inches. The plastic
package is placed in position, firmly adhering to the
solder paste.
Permanent attachment is performed by a reflow
soldering procedure during which the tab
temperature does not exceed +275 °C and the body
temperature does not exceed +250 °C, for standard
models and +260 °C for the RoHS compliant
devices.
These varactors are available in the three case
styles shown. When ordering, specify the desired
case style by adding the case designation (287 for
SOT-23, 1146 for SC70 3LD, 1141 for SOD-323) as
a suffix to the model number. For example,
MA4ST230-1141 specifies the MA4ST230 varactor
in the SOD-323 package. The model number
indicated is for a single varactor. Common cathode
pairs are available in SOT-23 package, and are
specified by adding “CK” to the end of the model
number. For example MA4ST230CK-287 specifies
the MA4ST230 varactor in common cathode pairs.
SC-79 (Case Style 1279)
0.020
0.50
0.020
0.50
0.053
1.35
Dimenstions:inches
mm
SOD-323 (Case Style 1141)
0.030
0.80
0.030
0.80
0.030
0.80
.090
2.2
Dimenstions: ^inches
mm
For RoHS Compliant Parts, use the Following
Suffices for the Given Package Style
( After the Base P/N ) :
SC-79 : 12790T
SOD-323 : 11410T
SC70 3LD : 1146FT
As example, the RoHS P/N for the Base P/N MAVR-
000230 in SOD-323 is :
MAVR-000230-1146FT.
Please refer to Application Note M538 for surface
mounting instructions.
SC-70, 3 Lead (Case Style 1146)
0.030
0.80
0.030
0.80
0.030
0.80
0.075
1.9
0.030
0.80
Dimenstions: ^inches
mm
5 _{Specifications are subject to change without prior notification}
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.