MADP-00208-13180W Datasheet, PDF (4/5 Pages) M/A-COM Technology Solutions, Inc. – Two PIN diodes in Flexible Configuration

MADP-000208-13180W
SURMOUNT ^TM 8m PIN Diode Pair
RoHS Compliant
Rev. V3
Die Handling and Mounting Information
Handling: All semiconductor chips should be handled with care to avoid damage or contamination
from perspiration, salts, and skin oils. The use of plastic tipped tweezers or vacuum pickups is
strongly recommended for individual components. Bulk handling should ensure that abrasion and
mechanical shock are minimized.
Electro-Static Sensitivity: The MADP-000208-13108W Diode Pair are ESD, Class 1A sensitive
(HBM). Proper ESD precautions should be taken.
Die Attach Surface: Die can be mounted with an 80Au/Sn20, eutectic solder preform, RoHS
compliant solders or electrically conductive silver epoxy. The metal RF and D.C. ground plane
mounting surface must be free of contamination and should have a surface flatness of < ±0.002‖.
Eutectic Die Attachment Using Hot Gas Die Bonder: A work surface temperature of 255^oC is
recommended. When hot forming gas is applied, the temperature should be approximately 290^oC.
The chip should not be exposed to temperatures greater than 320^oC for more than 10 seconds.
Eutectic Die Attachment Using Reflow Oven: Please visit the www.macomtech.com and see
Application Note M538, ―Surface Mounting Instructions‖ for the recommended time-temperature
profile.
Electrically Conductive Epoxy Die Attachment: A controlled amount of electrically conductive,
silver epoxy, approximately 1–2 mils in thickness, should be used to minimize ohmic and thermal
resistance. A thin epoxy fillet should be visible around the perimeter of the bond pad after placement
to ensure full area coverage. Cure conductive epoxy per manufacturer’s schedule. Typically 150°C
for 1 hour.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support