MAAL-008624_15 Datasheet, PDF (4/5 Pages) M/A-COM Technology Solutions, Inc. – High Dynamic Range Low Noise Amplifier

MAAL-008624
High Dynamic Range Low Noise Amplifier
400 - 500 MHz
Lead-Free SOIC-8^†
Rev. V1
† _{Reference Application Note M538 for lead-free solder reflow recommendations.}
Meets JEDEC moisture sensitivity level 1 requirements.
Recommended PCB Configuration
Cross Section View
RF Traces & Components
RF Ground
DC Routing
Customer Defined
The PCB dielectric between RF traces and RF ground
layers should be chosen to reduce RF discontinuities
between 50-ohm lines and package pins. M/A-COM
recommends an FR-4 dielectric thickness of 0.008” (0.20
mm) yielding a 50-ohm line width of 0.015” (0.38 mm).
The recommended RF metalization thickness is 1 ounce
copper.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support