MAADSS0012 Datasheet, PDF (4/5 Pages) M/A-COM Technology Solutions, Inc. – Digital Attenuator, 1-Bit, Single Control 21 dB, 0.8 - 8.0 GHz

MAADSS0012
Digital Attenuator, 1-Bit, Single Control
21 dB, 0.8 - 8.0 GHz
Typical Performance Curves
IP3
46
45
44
Insertion Loss State
Attenuation State
43
42
41
40
2.0 2.5 3.0 3.5 4.0 4.5 5.0
Frequency (GHz)
Lead-Free 2 mm 8-Lead PDFN^†
Rev. V2
IP2
90
85
80
Insertion Loss State
Attenuation State
75
70
65
2.0 2.5 3.0 3.5 4.0 4.5 5.0
Frequency (GHz)
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
†
Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.