XP1050-QJ Datasheet, PDF (3/7 Pages) Mimix Broadband – 7.0-9.0 GHz Linear Power Amplifier 6x6mm QFN

XP1050-QJ
2.5 W Power Amplifier
7.1 - 8.5 GHz
Rev. V1
Important Reliability Information:
The input and output capacitors on the die may be damaged through handling and assembly processes.
External DC blocks are recommended on the RF input and output lines on the PC board. If the output
capacitor shorts due to ESD damage, the part will continue to function with slightly degraded performance. IP3
may decrease by approximately 1.5 dB. If the input capacitor shorts due to ESD damage, the part will continue
to function with a slight shift in input return loss. Once shorted, the capacitor should remain shorted for the
standard product lifetime. The external DC blocks are needed to maintain the bias point on the part.
Even though the ESD rating using the Human Body Model is Class 1A, it is recommended to treat this part as a
Class 0 part. The rate of shorted capacitors due to ESD damage can be in the range of 10%. Shorted
capacitors on this part are not subject to the warranty because the part continues to operate reliably with only
slightly reduced performance.
Recommended Layout
MATERIAL: RO4350B, 10 mil.
CAPACITORS: 1µF (0805), 1000 pF (0402)
3
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]