English
Language : 

MAAM-009879_15 Datasheet, PDF (3/8 Pages) M/A-COM Technology Solutions, Inc. – Broadband CATV 2-Way Active Splitter with default loop-thru Switch
MAAM-009879
Broadband CATV 2-Way Active Splitter with default loop-thru Switch
50 - 1100 MHz
Rev. V1
Absolute Maximum Ratings 5,6,7
Parameter
Absolute Maximum
Max Input Power
+5 dBm
VDD
VCONTROL
+10.0 V
+8.5 V
Operating Temperature
Junction Temperature 8
-40°C to +85°C
+150°C
Storage Temperature
-65°C to +150°C
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. M/A-COM Technology does not recommend sustained
operation near these survivability limits.
7. These operating conditions will ensure MTTF > 1 x 106 hours.
8. Junction Temperature (TJ) = TA + Ó¨jc * (V * I)
Typical thermal resistance (Өjc) = 73 °C/W.
a) For TA = 25°C,
TJ = 66 °C @ 5.0 V, 110 mA
b) For TA = 85°C,
TJ = 122 °C @ 5.0 V, 100 mA
Schematic Including Off-Chip Components9
Truth Table10
VDD
VCONTROL
IN - OUT1 IN - OUT2
1
1
On
On
0
0
Off
On
10. Logic “1” for VDD = +5 volts and VCONTROL = +3.3 volts typical.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices. An external protection circuit using an
inexpensive anti-parallel diode pair can be used to
protect the IC.
Please reference application note AN3028 on
http://www.macomtech.com for further detail.
9. The exposed pad centered on the package bottom must be
connected to ground for RF, DC and thermal considerations.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.