DR65-0002 Datasheet, PDF (3/4 Pages) Tyco Electronics – Linear Driver for PIN Diode Attenuators

DR65-0002
Linear Driver for
PIN Diode Attenuators
Rev. V5
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω
Parameter
Output Drive Current
+V_CC Supply Range
+V_CC Supply Tolerance
+V_CC Quiescent Current
Linearity
Transfer Function
Settling Time
Test Conditions
Load Dependent
—
—
No Load
Application Dependent
Application Dependent
50% Ctl to 90%/10% RF
Units
mA
V
%
mA
dB
dB/V
µs
Min
10
3.0
—
—
±1
3
—
Typ
—
5.0
5
1.0
± 2.5
7.5
50
Max
—
12
—
2.0
—
10
—
Absolute Maximum Ratings ^1,2
Parameter
Absolute Maximum
+V_CC
Input +
+20 V
±5V
REF
±5V
Output Current
20 mA
Operating Temperature
-40ºC to +85ºC
Storage Temperature
-65ºC to +125ºC
Package Power Dissipation
150 mW
Lead Temperature
300ºC for 10 seconds
1. Exceeding any one or combination of these limits may cause
permanent damage to this device.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.