SW15-0314 Datasheet, PDF (2/4 Pages) Tyco Electronics – GaAs SP4T Absorptive Switch, DC - 3 GHz

SW15-0314
GaAs SP4T Absorptive Switch,
DC-3.0 GHz
Electrical Specifications: T_A = 25°C^1,2
Parameter
Insertion Loss
Test Conditions
—
Isolation
—
VSWR
RFC, RF1 - RF4 (On)
VSWR
RF1 - RF4 (Off)
Trise, Tfall
Ton, Toff
Transients
1 dB Compression
IP3
IP2
Vcc
Vee
Icc
Iee
10% to 90%
50% Control to 90% / 10%
RF
In-Band (peak-peak)
Input Power
Two-Tone Input Power up
to +5 dBm
Two-Tone Input Power up
to +5 dBm
—
—
Vcc = 4.5 to 5.5 V
Vctl = 0 to 0.8V, or Vcc –
2.1V to Vcc
Vee = -5.0V to -8.0V
Frequency
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
DC - 3.0 GHz
—
—
—
0.05 GHz
0.5 GHz to 3 GHz
0.05 GHz
0.5 GHz to 3 GHz
0.05 GHz
0.5 GHz to 3 GHz
—
—
—
—
Units
dB
dB
dB
dB
dB
dB
dB
dB
Ratio
Ratio
Ratio
Ratio
Ratio
Ratio
Ratio
Ratio
ns
ns
mV
dBm
dBm
dBm
dBm
dBm
dBm
V
V
mA
mA
1. All specifications apply when operated with bias voltages of +5V for Vcc and –5V for Vee.
2. When DC blocks are used, a 10K ohm return to GND is required on the RFC port.
Min
—
—
—
—
50
40
30
25
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
4.5
-8.0
—
—
Typ
1.0
1.2
1.2
1.4
60
50
40
35
1.6:1
1.6:1
1.6:1
1.6:1
1.3:1
1.5:1
1.9:1
2.4:1
50
150
50
+20
+27
+35
+46
+45
+60
5.0
—
0.2
0.1
Rev. V6
Max
1.3
1.4
1.6
1.8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
5.5
-5.0
4.0
1.0
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] • Europe Tel: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: [phone]
• China Tel: [phone]
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.