English
Language : 

SW-425 Datasheet, PDF (2/3 Pages) Tyco Electronics – 3 Watt Cellular T/R and Antenna Changeover Switch, DC - 3.0 GHz
SW-425
3 Watt Cellular T/R and Antenna Changeover Switch
DC - 3.0 GHz
Electrical Specifications: TA = +25°C
Parameter
Insertion Loss
Isolation
VSWR
Test Conditions
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
DC - 3 GHz
P1dB (3 V supply)
500 MHz - 3 GHz
P1dB (5 V supply)
500 MHz - 3 GHz
Input IP2
Input IP3
2nd Harmonics
3rd Harmonics
Trise, Tfall
Two-Tone, 5 MHz spacing, +10 dBm (+13 dBm total) VCTL = 3 V
0.9 GHz
Two-Tone, 5 MHz spacing, +10 dBm (+13 dBm total) VCTL = 3 V
0.9 GHz
Pin 30 dBm [VCTL] = 3 V
Pin 33 dBm [VCTL] = 5 V
Pin 30 dBm [VCTL] = 3 V
Pin 33 dBm [VCTL] = 5 V
10% to 90% RF, 90% to 10% RF
Ton, Toff
50% Control to 90% RF, Control to 10% RF
Transients
In-Band
Gate Leakage Current
VCTL = 3 V
Units
dB
dB
dB
dB
dB
dB
Ratio
dBm
dBm
dBm
dBm
dBc
dBc
dBc
dBc
ns
ns
mV
µA
Min
—
—
—
18
13
10
—
32
34
62
48
65
65
45
65
—
—
—
—
Typ
0.4
0.55
0.7
20
15
12
1.2:1
34
36
70
53
70
75
48
75
60
20
20
10
Rev. V5
Max
0.5
0.65
0.8
—
—
—
1.4:1
—
—
—
—
—
—
—
—
—
—
—
20
SOT-26
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.