SW-394 Datasheet, PDF (2/3 Pages) Tyco Electronics – GaAs SPDT High Isolation Terminated Switch

SW-394
GaAs SPDT High Isolation Terminated Switch
0.5 - 2.0 GHz
Electrical Specifications: T_A = 25°C
Parameter
Insertion Loss
Isolation
VSWR
1 dB Compression
Trise, Tfall
Ton, Toff
Transients
Input IP₂
Input IP₃
Test Conditions
0.5 - 1.0 GHz
1.0 - 2.0 GHz
0.5 - 1.0 GHz
1.0 - 2.0 GHz
0.5 - 1.5 GHz
Input Power, +5 V Control/Supply
0.5 GHz
0.9 GHz
1.5 GHz
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In-Band
2-Tone, 5 MHz spacing, +10 dBm each
0.5 GHz
0.9 GHz
2-Tone, 5 MHz spacing, +10 dBm each
0.5 GHz
0.9 GHz
Control Current
—
Units
dB
dB
dB
dB
Ratio
dBm
dBm
dBm
ns
ns
mV
dBm
dBm
dBm
dBm
µA
Rev. V5
Min.
—
—
37
32
—
—
—
—
—
—
—
—
—
—
—
—
Typ.
1.3
1.4
40
35
1.6:1
24
24
25
34
36
22
67
72
47
47
10
Max.
1.5
1.6
—
—
—
—
—
—
—
—
—
—
—
—
—
25
SOIC-8^†
†_{Meets JEDEC moisture sensitivity level 1 requirements.}
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.