SW-338 Datasheet, PDF (2/3 Pages) Tyco Electronics – GaAs SPDT Terminated Switch DC - 2.5 GHz

SW-338
GaAs SPDT Terminated Switch
DC - 2.5 GHz
Electrical Specifications: T_A = 25°C, V_C = 0 V / -2.9 V, Z₀ = 50 Ω
Parameter
Insertion Loss
Isolation
VSWR On/Off
Trise, Tfall
Ton, Toff
Transients
Test Conditions
DC - 0.5 GHz
0.5 - 1.0 GHz
1.0 - 2.0 GHz
DC - 0.5 GHz
0.5 - 1.0 GHz
1.0 - 2.0 GHz
DC - 2.0 GHz
10% to 90% RF, 90% to 10 % RF
50% Control to 90% RF, 50% Control to 10% RF
In-Band
Units
dB
dB
dB
dB
dB
dB
Ratio
nS
nS
mV
1 dB Compression Point
Input Power
50 MHz @ 2.9V
1.0 GHz @ 2.9V
50 MHz @ 5.0V
1.0 GHz @ 5.0V
dBm
dBm
dBm
dBm
2nd Order Intercept
Measured Relative to Input Power
(for two-tone input power up to +5 dBm)
50 MHz @ 2.9V
1.0 GHz @ 2.9V
50 MHz @ 5.0V
1.0 GHz @ 5.0V
3rd Order Intercept
Measured Relative to Input Power
(for two-tone input power up to +5 dBm)
50 MHz @ 2.9V
1.0 GHz @ 2.9V
50 MHz @ 5.0V
1.0 GHz @ 5.0V
Control Current
⏐V_C⏐ = 2.9 V
5. Typical values represent performance at middle of frequency range noted.
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
µA
Rev. V7
Min.
—
—
—
—
36
—
—
—
—
—
—
—
—
—
Typ. ⁵
0.55
0.60
0.65
50
43
35
1.1:1
10
20
25
15
16
26
27
Max.
—
0.7
—
—
—
—
—
—
—
—
—
—
—
—
—
46
—
—
52
—
—
63
—
—
82
—
—
27
—
—
27
—
—
47
—
—
50
—
—
15
35
Truth Table ⁶
Control Inputs
V1
V2
1
0
0
1
Condition of Switch
RF Common to Each RF Port
RFC-RF1
RFC-RF2
ON
OFF
OFF
ON
6. 0 = 0 V ± 0.2 V, 1 = -2.9 V to -5.0 V
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: [phone] / Fax: [phone]
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. _{M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make}
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.